PREVNEXT
 

5 Error Messages


This chapter lists in numerical order error messages you may receive while using SequeLink. Each error message is followed by a description of the error and recommended actions, if applicable.

351
Error detected while processing an administration request.
 
Cause
An administration request could not be processed by the server.
 
Action
Preceding or subsequent messages contain more detailed information.
352
Error detected while processing an administration request.
 
Cause
An administration request could not be processed by the server.
 
Action
Preceding or subsequent messages contain more detailed information.
353
Memory allocation failed while processing an administration request.
 
Cause
A request to the operating system to allocate memory for the SequeLink Server failed.
 
Action
Free memory resources. If the problem persists, contact DataDirect Technologies technical support.
354
An invalid argument is passed to an administration function.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
360
The requested node cannot be found in the monitor tree.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
361
Duplicate object identifier in the monitor tree.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
362
Could not delete the given node because it owns items that have not been deleted.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
370
The specified entity type does not exist.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
371
The specified attribute does not exist.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
372
The specified entity instance could not be found.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
373
The specified attributes do not match.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
374
The specified attribute ID is not valid.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
375
The specified entity type is not valid.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
376
The specified entity type is read-only.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
377
The specified configuration file could not be opened.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
378
The syntax of the configuration file is incorrect.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
379
An unexpected duplicate entity was detected.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
380
The required primary key attributes were not provided.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
381
The provided attribute is a primary key attribute.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
382
The provided attribute already exists.
 
Cause
An attempt was made to add an attribute that already exists.
 
Action
This error only occurs when multiple SequeLink administrators attempt to add the same attribute to the configuration at the same time. Using the SequeLink Manager, reconnect to the SequeLink Agent service to refresh the SequeLink Manager view of the configuration file. Then, execute the administration task again.
383
The configuration file was changed by someone else.
 
Cause
The configuration file has been modified by another administrator.
 
Action
Reload the configuration file and make the changes again.
390
Received a request to stop listening, ignoring other events on the queue.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
391
The semaphore operation could not be completed within the timeout period specified.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
392
Request to send an event failed because there is no listener active on the event queue.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
393
Request to send an event failed because the event queue is full.
 
Cause
The service could not send the events to the Event Processor because the event queue was full.
 
Action
Increase the value for both or either of the ServiceEvQShmQSize and ServiceEvQShmMaxResend service attributes.
394
Request to send an event failed because the event size exceeds the maximum event size.
 
Cause
The service could not send the event to the Event Processor because the event queue was too small to hold all the attributes of the event.
 
Action
Increase the value for the ServiceEvQShmQSize service attribute.
395
Request to create an IPC object failed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
396
The parameters needed to create an IPC key could not be found in the configuration file.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
397
A call to ftok failed. Check if the file xxx exists and is readable.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
398
Request to create or attach to shared memory (key=xxxx) failed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
399
Request to create a semaphore (key=xxxx) failed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
400
Request to create a message queue (key=xxxx) failed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
401
Failed to terminate the event queue cache because it is not empty.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
410
The specified parameter (xxxx) is invalid.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
411
The attribute xxx is not found in the attribute list of the event that is being processed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
412
The specified attribute (ID=xxxx) has an incorrect type.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
413
Failed to evaluate the profile filter expression for event with ID=xxxx.
 
Cause
The specified profile filter is not valid.
 
Action
Correct the syntax of the profile filter.
414
Profile filter evaluation failed because the expressions have incompatible types.
 
Cause
The specified profile filter is not valid.
 
Action
Correct the syntax of the profile filter.
415
Failed to parse the expression because of a syntax error at position xxxx.
 
Cause
The specified profile filter is not valid.
 
Action
Correct the syntax of the profile filter.
416
Failed to parse the profile filter expression.
 
Cause
The specified profile filter is not valid.
 
Action
Correct the syntax of the profile filter.
417
The provided monitor path (xxxx) is invalid.
 
Cause
The specified profile filter is not valid.
 
Action
Correct the syntax of the profile filter.
418
The specified action (xxxx) is not a valid event profile action.
 
Cause
The specified profile filter is not valid.
 
Action
Correct the syntax of the profile filter.
419
An invalid parameter value (xxxx) was specified.
 
Cause
The specified profile filter is not valid.
 
Action
Correct the syntax of the profile filter.
420
The specified event profile action (xxxx) failed to parse.
 
Cause
The specified profile filter is not valid.
 
Action
Correct the syntax of the profile filter.
421
Failed to load profile with ID=xxxx.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
430
Failed to open event trace file because the file version was not recognized.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
431
Failed to resize the event trace file.
 
Cause
An attempt to resize the event trace file failed, probably because SequeLink Server was restarted with a new value for the ServiceEventTraceSize service attribute that may be too large.
 
Action
Make sure that there is enough disk space available for the event trace file, which can be found at the location specified by the ServiceEventTraceLocation service attribute.
432
The request could not be completed because the event trace is in an error state.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
433
Failed to open the event trace file.
 
Cause
The event trace file could not be opened during service startup because the SequeLink service was not stopped properly, for example, because the server machine failed or the SequeLink service was terminated with an operating system command while it was processing events.
 
Action
Delete the event trace file. Then, re-start the service.
434
Failed to open the event trace file because event tracing was not stopped cleanly.
 
Cause
The event trace file has been left in an inconsistent state and can no longer be used.
 
Action
Delete the event trace file. Before deleting, make sure SequeLink services are stopped using the SequeLink Manager.
435
The event trace file is corrupt.
 
Cause
An inconsistency was detected within the event trace file.
 
Action
Delete the event trace file. If the problem persists, contact DataDirect Technologies technical support.
436
Failed to open file to export.
 
Cause
The specified export file cannot be opened.
 
Action
Verify the reason reported by the operating system.
437
Failed to close file to export.
 
Cause
An error was encountered when closing the specified export file.
 
Action
The contents of the specified export file may be corrupted; use another export file.
1000
System Exception: {0}.
 
Cause
An unexpected error occurred.
 
Action
Check the system exception {0} for more information. If necessary, contact DataDirect Technologies technical support.
1001
No more data available to read.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
1002
End of stream was detected on a read.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
1003
Error opening/loading com.ddtek.util.transliteration.properties.
 
Cause
An unexpected error occurred while accessing the transliteration properties file.
 
Action
Contact DataDirect Technologies technical support.
1004
Resource com.ddtek.util.transliteration.properties is corrupt.
 
Cause
An unexpected error occurred while accessing the transliteration properties file.
 
Action
Contact DataDirect Technologies technical support.
1005
Transliteration table {0} not found.
 
Cause
The SequeLink Server uses a Code page that is currently not supported by the SequeLink Client.
 
Action
Contact DataDirect Technologies technical support.
1006
Transliteration class {0} not found.
 
Cause
The SequeLink Server uses a Code page that is currently not supported by the SequeLink Client.
 
Action
Contact DataDirect Technologies technical support.
1007
Unsupported VM encoding {0}.
 
Cause
The SequeLink Server uses a Code page that is currently not supported by the SequeLink Client.
 
Action
Contact DataDirect Technologies technical support.
1008
Transliteration table {0} is corrupt.
 
Cause
An unexpected error occurred while accessing the transliteration table.
 
Action
Contact DataDirect Technologies technical support.
1009
Transliteration failed.
 
Cause
An unexpected error occurred while transliterating the String.
 
Action
Contact DataDirect Technologies technical support.
1010
Invalid transliteration class {0}.
 
Cause
An unexpected error occurred while accessing the transliteration table.
 
Action
Contact DataDirect Technologies technical support.
1011
Character set {0} not found in com.ddtek.util.transliteration.properties.
 
Cause
The SequeLink Server uses a Code page that is currently not supported by the SequeLink Client.
 
Action
Contact DataDirect Technologies technical support.
1012
IO Error creating temp file: {0}
 
Cause
An unexpected error occurred while creating a temporary file.
 
Action
Check the IO-exception {0} for more information. If necessary, contact DataDirect Technologies technical support.
1013
IO Error writing temp file: {0}
 
Cause
An unexpected error occurred while writing a temporary file.
 
Action
Check the IO-exception {0} for more information. If necessary, contact DataDirect Technologies technical support.
1014
IO Error reading temp file: {0}
 
Cause
An unexpected error occurred while reading a temporary file.
 
Action
Check the IO-exception {0} for more information. If necessary, contact DataDirect Technologies technical support.
1015
IO Error reading temp file: {0}
 
Cause
An unexpected error occurred while reading a temporary file.
 
Action
Check the IO-exception {0} for more information. If necessary, contact DataDirect Technologies technical support.
1016
Error fetching data from temp buffer
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
1017
The object is closed
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
1018
{0}
 
Cause
An unexpected error occurred. At runtime, an error message from the JDK will be displayed.
 
Action
Contact DataDirect Technologies technical support.
1019
Error attempting to backup position in data stream
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
1020
Error establishing socket. {0}
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
1021
Error establishing socket. Unknown host: {0}
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
1201
JDBC driver error: execute() returned true, but getResultSet() returned null.
 
Cause
A JDBC driver error occurred.
 
Action
Contact DataDirect Technologies technical support or the technical support of the JDBC driver vendor.
1202
java.sql.ResultSetMetaData.isNullable(int column) returns invalid value.
 
Cause
A JDBC driver error occurred. The driver returned a value not defined in the JDBC specification.
 
Action
Contact DataDirect Technologies technical support or the technical support of the JDBC driver vendor.
1203
java.sql.ResultSetMetaData.isNullable(int param) returns invalid value.
 
Cause
A JDBC driver error occurred. The driver returned a value not defined in the JDBC specification.
 
Action
Contact DataDirect Technologies technical support or the technical support of the JDBC driver vendor.
1204
Java Virtual Machine initialization failed.
 
Cause
The DataDirect 32-BIT ODBC2JDBC driver could not initialize the Java Virtual Machine.
 
Action
Contact DataDirect Technologies technical support.
1205
JNI function AttachCurrentThread() failed.
 
Cause
The DataDirect 32-BIT ODBC2JDBC driver could not attach the current thread to a Java Native Interface (JNI) thread context.
 
Action
Contact DataDirect Technologies technical support.
1206
An exception occurred in the JDBC driver, but the ODBC2JDBC driver could not retrieve the exception from the JVM.
 
Cause
A Java Virtual Machine error occurred. An exception was thrown by the Java Virtual Machine, but the JNI failed to retrieve it.
 
Action
If you consider the error fatal, contact DataDirect Technologies technical support.
1207
Unsupported SQL type.
 
Cause
A JDBC driver error occurred. The driver returned a value not defined in the JDBC specification.
 
Action
Contact DataDirect Technologies technical support or the technical support of the JDBC driver vendor.
1208
Statement is not a stored procedure, but output parameters are bound.
 
Cause
An application logic error is the most likely cause.
 
Action
Modify the application. Do not bind output parameters with simple Select, Insert, Delete, or Update statements.
1209
Statement is in an inconsistent state.
 
Cause
An application logic error is the most likely cause, and earlier errors reported by the DataDirect 32-BIT ODBC2JDBC driver were ignored.
 
Action
Check the logic of your application and respond properly to earlier reported errors.
1210
DatabaseProperties not found, defaults will be used.
 
Cause
The application specified "DatabaseProperties=xxx" in the connection URL; however, the corresponding properties file XXX.PROPERTIES could not be loaded.
 
Action
Ensure the properties file XXX.PROPERTIES referred by "DatabaseProperties=xxx" is installed.
2200
Network problem, local timeout during session setup, connection closed.
 
Cause
The session connection handshake could not be completed within the time limit set.
 
Action
Make sure that you are connecting to a SequeLink 5.x Server. If the problem persists, increase the connection timeout value.
2201
Network problem, remote timeout during session setup, connection closed.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
2202
Network resource problem, session aborted due to local buffer allocation failure, connection closed.
 
Cause
The SequeLink Client could not allocate internal buffers to read the reply sent from the SequeLink Server. The session was aborted and the connection was closed.
 
Action
Free memory resources. If the problem persists, contact DataDirect Technologies technical support.
2203
Network resource problem, session aborted due to remote buffer allocation failure, connection closed.
 
Cause
The SequeLink Server could not allocate internal buffers to read the request coming from the SequeLink Client. The session was aborted and the connection was closed.
 
Action
Free memory resources. If the problem persists, contact DataDirect Technologies technical support.
2204
Internal network error, session aborted due to local session protocol error, connection closed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2205
Internal network error, session aborted due to remote session protocol error, connection closed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2206
Network problem, cancel not allowed.
 
Cause
The cancel feature was disabled by the SequeLink service.
 
Action
If needed, the cancel feature can be enabled by setting the service attribute ServiceCancelEnabled=TRUE.
2207
Internal network error, session aborted due to session protocol data unit format error, connection closed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2208
Internal network error, session aborted, connection closed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2209
Network problem, no pending request to cancel.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2211
Network problem, cancel not possible because session is killed.
 
Cause
The cancel operation failed because the session was killed on the SequeLink Server. The connection was closed.
 
Action
Contact DataDirect Technologies technical support.
2213
Internal network error, connection closed because session key not found in remote session list.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2215
Network problem, cancel failed because all transport channels in use on remote session.
 
Cause
The cancel operation failed because the previous cancel request did not release all its resources on the SequeLink Server.
 
Action
Contact DataDirect Technologies technical support.
2217
Network problem, session aborted due to internal error in remote procedure call, connection closed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2219
Network problem, invalid IIOP object key, connection closed.
 
Cause
The SequeLink service the SequeLink Client is connected to did not accept the IIOP object key sent.
 
Action
Contact DataDirect Technologies technical support.
2221
Network problem, invalid IIOP operation target, connection closed.
 
Cause
The SequeLink service the SequeLink Client is connected to did not accept the IIOP operation target sent.
 
Action
Contact DataDirect Technologies technical support.
2223
Internal network error, session aborted due to remote procedure call failure, connection closed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2249
Internal network error.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2251
Connection closed due to session kill.
 
Cause
The session was killed on the SequeLink Server. The connection was closed.
 
Action
None.
2252
Connection closed due to service shutdown.
 
Cause
The session was killed on the SequeLink Server because the SequeLink service was shutting down.
 
Action
None.
2253
Connection closed, non SequeLink IIOP user exception received.
 
Cause
An IIOP user exception reply was received from a server that was not a SequeLink Server. The session was aborted, and the connection was closed.
 
Action
Contact DataDirect Technologies technical support.
2254
Connection closed, non SequeLink IIOP system exception received.
 
Cause
An IIOP system exception reply was received from a server that was not a SequeLink Server. The session was aborted, and the connection was closed.
 
Action
Contact DataDirect Technologies technical support.
2255
Connection closed, non SequeLink IIOP message format error received.
 
Cause
An IIOP message format error was received from a server that was not a SequeLink Server. The session was aborted, and the connection was closed.
 
Action
Make sure the client application is connecting to a SequeLink Server. If the problem persists, contact DataDirect Technologies technical support.
2300
Network problem, connection unexpectedly closed by peer.
 
Cause
The server closed the transport connection. If logging was enabled, the message give up waiting for incomplete record will be recorded in the service debug log file. This error can occur when the server does not recognize the handshake request.
 
Action
Make sure the client application is connecting to a SequeLink Server. If the problem persists, contact DataDirect Technologies technical support.
2302
TCP/IP error, the remote host cannot be reached from this host at this time.
 
Cause
TCP/IP cannot establish a connection with the SequeLink Server host because no route to the SequeLink Server was found.
 
Action
Make sure that:
  • The network configuration is correct
  • A network route to the SequeLink Server is available
  • The SequeLink Server is active
Try another TCP/IP network application to verify whether the server is reachable.
2303
TCP/IP error, the network is not reachable from this host.
 
Cause
TCP/IP cannot establish a connection with the SequeLink Server host because no route can be found to the network on which the host resides.
 
Action
Make sure that:
  • The network configuration is correct
  • A network route to the SequeLink Server is available
  • The SequeLink Server is active
Try another TCP/IP network application to verify whether the server is reachable.
2304
TCP/IP error, network subsystem down.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2305
TCP/IP resource problem.
 
Cause
A network operation failed because TCP/IP had insufficient resources.
 
Action
Check for heavy traffic conditions on the server.
2306
TCP/IP error, connection refused.
 
Cause
There was no process waiting for connections on the SequeLink Server host at the specified port or the SequeLink Server was experiencing too many simultaneous connection attempts.
 
Action
Contact DataDirect Technologies technical support.
2307
TCP/IP error, the specified address is already in use.
 
Cause
TCP/IP resource problem. A connection failed because all ports were being used.
 
Action
Re-attempt the connection when more network resources are available.
2308
TCP/IP error, connection timed out.
 
Cause
The connection has been closed because no response was received. The network may have gone down without notice, the client/server host was unreachable, or the SequeLink Server was experiencing too many simultaneous connection attempts.
 
Action
Check for heavy traffic conditions on the server.
2309
Network problem, could not load transport manager.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2310
TCP/IP error, connection reset by peer.
 
Cause
The connection was closed by the peer. When the specified port is serviced by a non-SequeLink Server, this warning message can occur if the server goes down while trying to process a handshake request.
 
Action
Check the server logs. If the failure was caused by the SequeLink Server stopping unexpectedly, contact DataDirect Technologies technical support.
2311
TCP/IP network error, connection closed.
 
Cause
An unexpected TCP/IP error occurred. The connection was closed.
 
Action
Contact DataDirect Technologies technical support.
2312
Network problem, connection closed due to idle event on transport endpoint not linked to session.
 
Cause
A connection was established with the SequeLink Server, but no data was received by the SequeLink Server within the keep alive time frame. The connection was closed.
 
Action
Increase the keep alive setting on the server.
2313
Network resource problem, connection closed due to buffer allocation problem.
 
Cause
A request to the operating system to allocate memory failed.
 
Action
Free memory resources. If the problem persists, contact DataDirect Technologies technical support.
2314
Internal network problem, connection closed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2315
Network problem, unknown session conversation protocol.
 
Cause
An attempt was made to connect to a SequeLink Server with an incompatible version of SequeLink.
 
Action
Check the version of the SequeLink Server to make sure it is compatible with the current version of the installed SequeLink software. If the problem persists, contact DataDirect Technologies technical support.
2318
Network problem, connection time out.
 
Cause
The TCP/IP connection could not be established within the set time limit.
 
Action
Increase the time interval and try again to connect.
2320
Network problem, connection time out.
 
Cause
The TCP/IP connection to the server host could not be established within the set time limit.
 
Action
Increase the time interval and try again to connect.
2321
Network problem, listener could not be started because port is already in use.
 
Cause
The port specified for the SequeLink service was being used by another application.
 
Action
Stop the application that is using the port or reconfigure the SequeLink service to use another port.
2402
Session refused, service is shutting down, connection closed.
 
Cause
The requested session was not accepted because the service was shutting down.
 
Action
None.
2403
Network resource problem, session refused, connection closed.
 
Cause
The SequeLink Server failed to allocate a network resource.
 
Action
Check for heavy traffic conditions on the server.
2404
Session refused by service, connection closed.
 
Cause
The server process was unable to accept the connection request.
 
Action
Check the service debug log file or event trace file for details.
2405
Network resource problem, session refused, connection closed.
 
Cause
The SequeLink Server failed to allocate a network resource.
 
Action
Check for heavy traffic conditions on the server.
2406
Session refused, service process could not be spawned, connection closed.
 
Cause
The service process launch failed.
 
Action
Check the service debug log file or the system log facility for the specific problem.
2450
Invalid host, no leading blanks allowed.
 
Cause
The specified host name starts with a blank character. Blank characters, including leading or trailing blanks, are not allowed in the host name.
 
Action
Specify the correct host name, making sure not to include a blank character at the beginning of the name.
2451
Invalid port, no trailing blanks allowed.
 
Cause
The specified port ends with a blank character. Blank characters, including leading or trailing blanks, are not allowed in the port.
 
Action
Specify the correct port, making sure not to include any trailing blank characters.
2452
Invalid host or port, no blanks allowed.
 
Cause
The specified host or port contained a blank character. Blank characters, including leading or trailing blanks, are not allowed in the host name or port.
 
Action
Specify the correct host name or port, making sure it does not contain any blank characters.
2453
Invalid port, number out of range.
 
Cause
The specified port number exceeds the maximum value of 32768.
 
Action
Specify the correct port using a valid port value.
2454
Internal network error during parsing host and port.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2455
Internal network error, missing separator.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2456
Invalid host or number, `:' character not allowed.
 
Cause
The host name or number included a colon (:).
 
Action
Specify the correct host name or number without a colon.
2457
Invalid host, `:' character not allowed.
 
Cause
The host name included a colon (:).
 
Action
Specify the correct host name without a colon.
2458
Invalid port, `:' character not allowed.
 
Cause
The port included a colon (:).
 
Action
Specify the correct port without a colon.
2459
Internal network error during parsing host and port.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2460
Internal network error during parsing host and port.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2461
Invalid port, numerical value < 0 is not allowed.
 
Cause
An invalid port number was specified.
 
Action
Specify the correct port using a valid value.
2462
Invalid port, numerical equal to 0 is not allowed.
 
Cause
An invalid port number was specified.
 
Action
Specify the correct port using a valid value.
2463
Host name or service name too long.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2464
Internal network error during parsing host and port.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2465
Internal network error during parsing host and port.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2466
Network resource problem, memory allocation failure during parsing host and port.
 
Cause
A system resource was not allocated while parsing the value provided for the host or port.
 
Action
Free memory resources. If the problem persists, contact DataDirect Technologies technical support.
2467
Internal network error during parsing host and port.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2468
Internal network error, no host and port specified.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
2469
Network problem, host resolution failure.
 
Cause
The specified server host name could not be resolved to a valid IP address.
 
Action
Map the server host name to a valid IP address.
2470
Network problem, port resolution failure.
 
Cause
The service name could not be resolved to a port number.
 
Action
Check the TCP/IP services configuration file.
3001
Internal error, memory allocation failed.
 
Cause
Memory allocation error.
 
Action
Free memory resources. If the problem persists, contact DataDirect Technologies technical support.
3002
Internal error, corrupt context.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3003
Internal error, invalid request received from the client application.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3004
Internal error, an unexpected exception was detected.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3005
Internal error, a fatal server error was detected.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3006
Internal error, a fatal error was detected during event processing.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3007
Internal error, an invalid argument was specified.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3008
OSLogon authentication mechanism requires root privilege.
 
Cause
An attempt was made to authenticate a connection to a UNIX SequeLink Server using the OSLogon mechanism, but the UNIX SequeLink Server is not running as root.
 
Action
Make sure that the UNIX SequeLink Server is running as root.
3009
Authentication failed.
 
Cause
The service attribute is set to ServiceDetailedOSLogonErrors=FALSE and the OSLogon authentication process detected an error.
 
Action
Correct the authentication information, typically the user name or password. If the problem persists, contact your system administrator to find out why the specified user is not allowed access to the server.
3010
Could not create a log file in ServiceDebugLogPath.
 
Cause
A session Debug Log File could not be created.
 
Action
Verify that the UNIX System Services HFS directory specified in the ServiceDebugLogPath service attribute exists, and the Userid of the Server has authorization to create a file in this directory.
In addition, check whether the file system is full.
3011
Unable to find the specified session in the list of active sessions while processing the kill session request.
 
Cause
The service received a session ID of a non-existing session.
 
Action
None.
3012
Configuration file was changed by someone else.
 
Cause
The configuration file has been modified by another administrator.
 
Action
Reload the configuration file and make the changes again.
3013
The value for maximum number of threads (maxv) exceeds the OS defined limit (maxosv), maximum threads downgrading to OS limit.
 
Cause
The value of the ServiceMaxThreads service attribute is higher than the operating system allows. The service will only use the number of threads allowed by the operating system.
 
Action
Correct the value of the ServiceMaxThreads service attribute.
3014
The value for minimum number of threads (maxv) exceeds the value for maximum number of threads (minv), downgrading min to max value.
 
Cause
The value of the ServiceMinThreads service attribute is higher than the value of the ServiceMaxThreads service attribute. The service will use the value of the ServiceMaxThreads service attribute as the value for the minimum number of threads.
 
Action
Correct the value of the ServiceMinThreads service attribute.
3016
Unable to configure enough threads (6) for the thread pool.
 
Cause
The value of the ServiceMinThreads service attribute is not a valid value. The service will not start.
 
Action
Make sure that the value of the ServiceMinThreads service attribute is at least 6.
3017
Error writing to trace file.
 
Cause
No data can be written to the session debug log file, probably because the file system is full.
 
Action
Remove old files on the full file system.
3021
Internal error, unable to load the server configuration file.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3025
Internal error, unable to locate settings for service xxxx in the server configuration file (xxxx).
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3043
Internal error, event trace information is not available from a service with a process based connection model.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3044
The configured debug log path for the service is not valid.
 
Cause
The directory specified by the ServiceDebugLogPath service attribute is not accessible.
 
Action
Make sure the specified directory exists and is accessible.
3045
The server listener component ran out of network resources.
 
Cause
The SequeLink Server was unable to accept a new connection request because of insufficient network resources. The SequeLink Server will wait 1 second before accepting new SequeLink Client connections.
 
Action
Re-attempt the connection.
3046
Internal error, unable to access the monitor tree.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3047
Invalid table type filter is configured.
 
Cause
The value set for the DataSourceTableTypeFilterList service attribute is not valid.
 
Action
Specify a valid value for the DataSourceTableTypeFilterList service attribute. For information about valid values for SequeLink service attributes, refer to the SequeLink Administrator's Guide.
3048
Internal error, failed to initialize the event trace component.
 
Cause
The service failed to start because the event trace component did not initialize correctly.
 
Action
Make sure that:
  • The event trace file is not being used by another application
  • The directory specified by the ServiceEventTraceLocation service attribute exists and is accessible
  • There is enough disk space
If the problem persists, contact DataDirect Technologies technical support.
3049
Only select statements are allowed in this read-only connection.
 
Cause
The value for the DataSourceReadOnly service attribute was set to "select", and the application tried to execute a statement that was not a Select statement.
 
Action
Change your application, or change the DataSourceReadOnly service attribute to accept statements other than Select statements.
3050
Internal error, an invalid action parameter was detected while processing a monitor request.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3051
Due to a fatal error condition with the DBMS session, no new request can be processed.
 
Cause
A serious error has previously occurred within the DBMS session.
 
Action
The client application must disconnect.
3052
Maximum cputime limit has been exceeded.
 
Cause
The session has exceeded its maximum CPU time, no more request are allowed.
 
Action
The client application must disconnect.
3053
Only select and batch statements are allowed in this read-only connection.
 
Cause
The DataSourceReadOnly service attribute was set to "select and batches", and the application tried to execute a statement that was not a Select statement or a Batch statement.
 
Action
Change your application, or change the DataSourceReadOnly service attribute. For information about valid values for SequeLink service attributes, refer to the SequeLink Administrator's Guide.
3054
Found syntax error(s) within the DataSourceSessionToken attribute.
 
Cause
Syntax error in DataSourceSessionToken attribute.
 
Action
Verify that the DataSourceSessionToken attribute contains valid placeholders.
3055
Found syntax error(s) within the DataSourceAutoApplId attribute.
 
Cause
Syntax error in one of the DataSourceAutoApplId attribute entries.
 
Action
Verify the syntax of the DataSourceAutoApplId attribute is correct. It must contain exactly 40 hexadecimal digits.
3056
A batch cannot contain SQL statements that return a result set.
 
Cause
A batch cannot contain SQL statements that return a result set.
 
Action
Check your JDBC application. Make sure that only row count generating statements are used in a batch.
3057
Internal error, the monitor request could not be processed because a required action parameter was not provided.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3058
Internal error, error detected in the event processor.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3059
The specified data source is not defined.
 
Cause
The specified server data source is not a valid data source for the specified SequeLink service.
 
Action
Specify a valid server data source for the SequeLink service.
3060
Internal error, the specified authentication mechanism is not accepted.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3061
Authorization failure.
 
Cause
The ServiceAuthMethods or ServiceAdminAuthMethods service attributes (in combination with the ServiceUser or ServiceAdministrator attributes, respectively) do not allow the user to perform the requested action.
 
Action
Contact your SequeLink administrator for details.
3062
Internal error, unknown provide ID.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3063
Maximum number of shared counter instances reached.
 
Cause
SequeLink was unable to export monitoring data for a new session to the Windows performance monitor because the shared counter memory was full. The size of the shared counter memory is configured by the ServiceEvQShmMonitorSize service attribute.
 
Action
Increase the shared counter memory by changing the ServiceEvQShmMonitorSize service attribute. For information about valid values for SequeLink service attributes, refer to the SequeLink Administrator's Guide.
3064
Internal error, an invalid monitor object was specified while processing an event.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3065
Save operation not allowed, file allocation status or file organization incorrect.
 
Cause
A remote SequeLink Agent tried to save changes, and the SequeLink Server was started with a SWANDD Data Definition that specified an incorrect file allocation status or file organization.
 
Action
Correct the SWANDM Data Definition in the server JCL (use DISP=OLD). Verify that the SequeLink configuration file has a sequential file organization. Then, restart the SequeLink Server.
3066
Configuration file is in use by another connection, please retry.
 
Cause
An attempt to update the SequeLink configuration file was refused because another SequeLink Manager application has locked the SequeLink configuration file.
 
Action
Wait for the other SequeLink Manager application to release the lock on the SequeLink configuration file. Then, re-attempt the SequeLink Manager operation.
3067
The user password was changed successfully.
 
Cause
An informational message was generated when the server password of the user was successfully changed.
 
Action
None.
3068
The application specified an invalid application identifier.
 
Cause
The application ID specified by the application is not recognized by the SequeLink service.
 
Action
Make sure that the application is specifying the correct application ID, or change the DataSourceAutoApplId service attribute of the SequeLink service to accept the application ID. For information about application IDs or changing SequeLink service attributes, refer to the SequeLink Administrator's Guide.
3069
The application failed to specify a valid application identifier.
 
Cause
Because the application did not provide a valid application ID, client requests will be refused.
 
Action
Make sure that the application is specifying the correct application ID, or change the DataSourceAutoApplId service attribute of the SequeLink service to accept the application ID. For information about application IDs or changing SequeLink service attributes, refer to the SequeLink Administrator's Guide.
3070
License verification failed.
 
Cause
The SequeLink Server could not locate the required license to execute the client request. The request is refused.
 
Action
Make sure a valid SequeLink license is registered. If the problem persists, contact DataDirect Technologies technical support.
3071
Maximum number of sessions reached.
 
Cause
The number of active sessions is exceeding the value of the configuration parameter. Incoming client connection requests are denied.
 
Action
None.
3078
Internal error, invalid search argument type specified.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3079
Cannot initialize the ICU translator.
 
Cause
The ICU translator could not be initialized because one of the codepages is not supported by the ICU.
 
Action
Use an ICU supported codepage. If the problem persists, contact DataDirect Technologies technical support.
3080
Service configuration error, the ServiceCodepage configuration setting has an incorrect value.
 
Cause
The current ServiceCodePage setting is not allowed.
 
Action
Change the ServiceCodePage setting. If the problem persists, contact DataDirect Technologies technical support.
3081
Accessing a SequeLink service configured with ServiceCodepage = Database requires SequeLink client version 5.4 or higher.
 
Cause
The connection is using an unsupported version of the SequeLink Client.
 
Action
Upgrade the SequeLink Client to Version 5.4 or higher. If the problem persists, contact DataDirect Technologies technical support.
3082
Access to datasource is disabled.
 
Cause
Access to the data source is rejected as specified in DataSourceEnableAccess. Refer to the SequeLink Administrator's Guide for more information on the DataSourceEnableAccess service attribute.
 
Action
If access is needed, contact your SequeLink administrator to change the DataSourceEnableAccess setting.
3101
Error detected while processing an administration request.
 
Cause
The administration request could not be processed by the SequeLink Server.
 
Action
Preceding or subsequent messages contain more detailed information.
3102
An invalid argument was detected while processing an administration request.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3103
Unexpected error detected while processing an administration request.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3104
The requested administration function is not implemented on this platform.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3105
Memory allocation failed while processing an administration request.
 
Cause
A request to the operating system to allocate memory for the SequeLink Server failed.
 
Action
Free memory resources. If the problem persists, contact DataDirect Technologies technical support.
3106
A collection library function failed while processing an administration request.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3107
An operation on the server configuration file failed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3108
An operation on the NT registry failed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3110
Failed to open the server configuration file for reading.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3111
Failed to open the server configuration file for writing.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3112
Failed to open the server configuration file because its syntax is incorrect.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3113
Failed to open the server configuration file because the file does not exist.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3114
Failed to save the server configuration file.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3115
Failed to save the server configuration file because the file backup failed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3116
Failed to attach to the event queue.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3117
Failed to send event to event queue.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3118
Failed to access the event queue.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3119
Failed to send an event because a wait operation timed out.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3120
Failed to process the administration request because the specified handle has not been opened.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3122
Failed to process the administration request because the version of the configuration file is not supported by this version of SequeLink.
 
Cause
An attempt was detected to open a SequeLink configuration file with a SequeLink version that is incompatible with the current version of the installed SequeLink software.
 
Action
Use a compatible version of the installed SequeLink software to open the SequeLink configuration file.
3130
Failed to process to remote administration request.
 
Cause
The administration request could not be processed by the server.
 
Action
Preceding or subsequent messages contain more detailed information.
3131
The requested entity was not found in the server configuration file.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3132
The requested attribute was not found in the server configuration file.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3133
The specified attribute ID is not valid.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3134
An unexpected duplicate entity was detected.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3137
[swadm] Failed to open the Service Control Manager.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3138
Failed to open the specified OS service.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3139
Failed to create the specified OS service.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3140
Failed to delete the specified OS service.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3141
Failed to unregister the OS service because it is not stopped.
 
Cause
An attempt to delete or unregister a service that is still active was detected.
 
Action
If the SequeLink Manager lists the SequeLink service as inactive, the SequeLink service may be in the process of stopping. Wait for the SequeLink service to stop completely and retry.
3142
Failed to register the specified OS service because the service already exists.
 
Cause
An attempt was made to register a SequeLink service with a name that was already used by another operating system service.
 
Action
Make sure the name you choose for your SequeLink service is not being used by another operating system service.
3143
The required primary key attributes were not provided.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3144
Requested operation on the specified OS service failed because a wait operation timed out.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3145
The TCP port for the service could not be registered because it is registered for another network service.
 
Cause
The SequeLink service is configured to use a TCP/IP port that is registered for another network service on the machine. If the other service is active, it will not be possible to start the SequeLink service.
 
Action
If you are confident that the network service for which the port was registered will never be active at the same time as the SequeLink service you created, you can continue. If unsure, change the TCP/IP port for the SequeLink service.
3146
The TCP port for the service could not be registered/unregistered because the services file could not be opened.
 
Cause
The %SystemRoot%\system32\drivers\etc\services file (Windows NT/Windows 200x/Windows XP) or the /etc/services file (UNIX) could not be opened.
 
Action
Contact your system administrator. If the problem persists, contact DataDirect Technologies technical support.
3147
The TCP port for the service could not be registered/unregistered because the services file could not be accessed.
 
Cause
A file input/output error was detected while accessing the services file (%SystemRoot%\system32\drivers\etc\services on Windows 200x or Windows XP or /etc/services on UNIX).
 
Action
Contact your system administrator. If the problem persists, contact DataDirect Technologies technical support.
3148
Failed to unregister the OS service because it is not a SequeLink Service.
 
Cause
An attempt to unregister a SequeLink service failed because the SequeLink service name was being used by another operating system service.
 
Action
Make sure that the name you choose for your SequeLink service is not being used by another operating system service.
3149
The configuration file was changed by someone else.
 
Cause
The configuration file has been modified by another administrator.
 
Action
Reload the configuration file and make the changes again.
3150
Failed to process the remote management request.
 
Cause
The management request could not be processed by the server.
 
Action
Preceding or subsequent messages contain more detailed information.
3151
Failed to start the specified SequeLink service.
 
Cause
The SequeLink service did not start.
 
Action
Examine the service debug log file or service event trace file for more information.
3152
Failed to stop the specified SequeLink service.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3153
Failed to obtain the status of the specified OS Service.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3154
Failed to start the specified service because it is already running.
 
Cause
An attempt to start a SequeLink service that is already running was detected.
 
Action
If the SequeLink Manager lists the SequeLink service as inactive, the SequeLink service may be in the process of stopping. Wait for the SequeLink service to stop completely and then retry.
3155
Failed to process the administration request because the required service executable is not found.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3156
Failed to open the Service. The SequeLink Administrator has not enough privileges to start/stop a service.
 
Cause
The operating system requires processes that must have administrator privileges for opening the service controller.
 
Action
Ask your security administrator to grant sufficient privileges.
3160
Failed to process remote monitoring request.
 
Cause
The monitoring request could not be processed by the server.
 
Action
Preceding or subsequent messages contain more detailed information.
3161
Failed to process the monitor request because a required counter could not be found in the monitor.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3170
Failed to process the remote query event trace request.
 
Cause
The event trace request could not be processed by the server.
 
Action
Preceding or subsequent messages contain more detailed information.
3171
Failed to process the query event trace request because the specified handle has not been opened.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3172
Failed to open the event trace.
 
Cause
The SequeLink Server was unable to open the event trace file.
 
Action
Make sure that the ServiceEventTraceLocation service attribute contains a valid event trace file location and that it is accessible. If the problem persists, contact DataDirect Technologies technical support.
3180
Failed to process the profile generator request because the required object could not be found in the profile.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3181
Failed to process the profile generator request because a duplicate object was found in the profile.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3186
Failed to open the Service Control Manager. The SequeLink Administrator has not enough privileges to create/delete a service.
 
Cause
The operating system requires processes that must have administrator privileges for starting and deleting services.
 
Action
Ask your security administrator to grant sufficient privileges.
3201
Unable to retrieve error message from backend ODBC driver.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3202
3202 Unable to retrieve warning message from backend ODBC driver.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3203
Required user name is missing.
 
Cause
The SequeLink service has been configured to require a database user name, but the SequeLink Client did not provide a database user name.
 
Action
Make sure that all required connection attributes are specified.
3204
Select statement not allowed in batch processing.
 
Cause
A Select statement was detected in a batch of statements.
 
Action
Change your application so that Select statements are not included in the batch.
3208
Unable to retrieve the code page from IBM/DB2 UDB.
 
Cause
The SequeLink server could not retrieve the code page from IBM/DB2 UDB during the connection setup.
 
Action
Set the ServiceDebugLogLevel to debug. Make a new connection and look for the message in the session log file: SWANDB_SPEC_GetDBCodePageSettings : cannot retrieve the DB2 codepage settings (sqlcode=xxx).
Contact DataDirect Technologies technical support and provide the codepage setting information.
3209
A connection to a SequeLink service with enhanced code page support can only be established when ServiceCodepage is set to "Database".
 
Cause
A connection to a SequeLink service with enhanced code page support was executed when the ServiceCodePage was set to Default or OS.
 
Action
Check the SequeLink configuration and verify that the ServiceCodePage attribute is set to Database for the service to which you want to connect. If the problem persists, contact DataDirect Technologies technical support.
3210
A connection to a SequeLink service without enhanced code page support can only be established when ServiceCodePage is set to "Default" or "OS".
 
Cause
A connection to a SequeLink service with enhanced code page support was executed and the ServiceCodePage is set to Database.
 
Action
Check the SequeLink configuration and verify that the ServiceCodePage for the service to which you want to connect is set to Default or OS. If the problem persists, contact DataDirect Technologies technical support.
3211
A connection to a SequeLink service, set up with ServiceCodepage = Database, requires at least SequeLink 5.4 client or higher for ODBC, JDBC or ADO.NET.
 
Cause
A connection to a SequeLink service with enhanced code page support was executed using an unsupported version of the SequeLink Client. The ServiceCodePage=Database setting is supported on SequeLink Clients version 5.4 or higher.
 
Action
Check the version of the SequeLink ODBC, JDBC, or .NET Client.
3213
CLOB data type in UTF8 is not supported in SequeLink for DB2 UDB.
 
Cause
DB2 UDB Unicode databases store character-based Large Objects (CLOB) data in UTF-8. SequeLink for DB2 UDB does not support this multi-byte character data type.
 
Action
Check your application. Remove the references to UTF-8-based CLOB columns or change the references to UCS-2-based DBCLOB columns.
3215
The environment variable LIBPATH has not been set correctly. The JVM cannot be started.
 
Cause
LIBPATH does not contain the value for the library with the Java Virtual Machine DLL or shared library.
 
Action
Check LIBPATH to see if it contains the value for the library.
3216
The Java Virtual Machine is started.
 
Cause
This is an informational message.
 
Action
None.
3301
Optional feature not implemented.
 
Cause
A request to change to another catalog was refused. You cannot change to another catalog.
 
Action
Do not try to change to another catalog.
3302
Unsupported transaction level.
 
Cause
A request to change to an unsupported transaction level was refused.
 
Action
Use a supported transaction level.
3303
An invalid Oracle parameter kind is encountered.
 
Cause
Oracle returned a stored procedure parameter type that is not documented.
 
Action
Contact DataDirect Technologies technical support.
3304
An incorrect number of parameter markers is encountered in the statement.
 
Cause
A stored procedure was executed, but the number of parameters did not correspond with the stored procedure definition.
 
Action
Change the stored procedure statement that executes the stored procedure in your application.
3305
SequeLink does not support CLOB/BLOB parameters as stored procedure parameters.
 
Cause
A stored procedure was executed, but a CLOB/BLOB parameter was detected.
 
Action
Change the stored procedure in your application.
3306
Internal error. An invalid OCI handle was passed to the database.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3307
Unexpected XA error.
 
Cause
An Oracle-specific XA (distributed transaction) call failed.
 
Action
Contact DataDirect Technologies technical support.
3308
The specified object does not exist.
 
Cause
A stored procedure was executed for which no definition was found.
 
Action
Make sure that the stored procedure you execute exists in the database and that you have the privileges to execute the stored procedure.
3309
A filter value is too long.
 
Cause
The DataSourceSchemaFilterList or DataSourceTableTypeFilterList service attribute contains a value that is too long.
 
Action
Correct the DataSourceSchemaFilterList or DataSourceTableTypeFilterList service attribute value.
3310
An Oracle procedure was created with compilation errors.
 
Cause
An error was detected in the syntax of the statement that created the stored procedure.
 
Action
Correct the syntax of the statement that created the stored procedure.
3311
A data dictionary statement was called with an invalid parameter value.
 
Cause
A data dictionary statement (for example, SQLSpecialColumns) was called, but at least one of the parameters had a value that was not valid.
 
Action
Contact DataDirect Technologies technical support.
3312
SequeLink does not support this data type for stored procedure parameters.
 
Cause
A stored procedure was executed, and a data type that SequeLink does not support for stored procedures was detected.
 
Action
Change the statement that executes the stored procedure in your application.
3313
Internal error. The specified data source is not found in the SequeLink configuration file.
 
Cause
The specified server data source could not be found in the SequeLink configuration file.
 
Action
Contact DataDirect Technologies technical support.
3314
Select statement not allowed in batch processing.
 
Cause
You cannot execute a Select statement in a batch of statements.
 
Action
Change your application so that Select statements are not included in the batch.
3315
A required Oracle user name is missing.
 
Cause
The SequeLink service is configured to require a database user name, but a database user name was not provided by the SequeLink Client.
 
Action
Specify the database user name when you attempt to connect.
3316
An invalid Oracle SID is specified in the SequeLink configuration file.
 
Cause
The SequeLink configuration file specified an invalid Oracle SID.
 
Action
Specify an existing, valid Oracle SID.
3317
Internal error. An unsupported action is encountered in a fetch callback routine.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3318
An Oracle DATE value can only be converted to a SequeLink timestamp value.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3319
A SequeLink timestamp value can only be converted to an Oracle DATE value.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3320
An Oracle NUMBER value can only be converted to a SequeLink decimal value.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3321
A SequeLink decimal value can only be converted to an Oracle NUMBER value.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3322
A backslash is not a valid value for a searchable input parameter of a data dictionary statement.
 
Cause
A searchable input parameter of a data dictionary statement (for example, SQLTables) has a backslash character (\) value that is not followed by another character.
 
Action
Change the data dictionary statement in your application to use a valid value for a searchable input parameter.
3323
The precision of a decimal input parameter is out of range.
 
Cause
The SequeLink Client sent a decimal input value with a precision that is larger than the maximum allowed Oracle precision.
 
Action
Change your application.
3324
The impersonation of the SequeLink Server for Oracle failed.
 
Cause
The SequeLink Server is configured in OS integrated mode (DataSourceLogonMethod=OSIntegrated), but the impersonation of the SequeLink Server failed.
 
Action
Contact DataDirect Technologies technical support.
3326
Invalid querytimeout value.
 
Cause
Only positive values are allowed as querytimeout.
 
Action
Specify a valid querytimeout value.
3327
Internal error. An invalid SequeLink decimal parameter value encountered.
 
Cause
The SequeLink Client sent a decimal value that is not recognized by the SequeLink Server.
 
Action
Contact DataDirect Technologies technical support.
3328
Oracle TIMESTAMP WITH TIME ZONE is not supported by this SequeLink configuration.
 
Cause
By default, SequeLink does not support the Oracle type Timestamp With Time Zone because there is no corresponding ODBC/JDBC/ADO type to represent this data.
 
Action
SequeLink implements a workaround to support Timestamp With Time Zone. See the description of DataSourceORAMapTSWTZ in the SequeLink Administrator's Guide.
3329
Invalid configuration SequeLink service : ServiceCodePage = Database is not supported for Oracle 8.0.
 
Cause
Unsupported configuration.
 
Action
Check your current configuration, SequeLink Server for Oracle 8.0 only supports the value Default or OS for the setting ServiceCodePage.
3330
The Oracle datatype XMLTYPE is not supported. Please convert the XMLTYPE to a string or clob.
 
Cause
SequeLink does not support the Oracle data type XMLTYPE.
 
Action
Use the Oracle DBMS packages to convert the XMLTYPE to a string or CLOB.
3331
The resultset contains an unsupported Oracle datatype.
 
Cause
The resultset contains an unsupported data type, resulting in unsupported behavior.
 
Action
Check the Oracle data types in your resultset. Refer to the SequeLink Developer's Reference for the Oracle data types that SequeLink supports.
3333
Unsupported behavior for this SequeLink Server version.
 
Cause
Searching a CLOB with a CLOB locator as search argument is not supported.
 
Action
None.
3401
The database does not support catalogs.
 
Cause
An attempt was made to use a catalog, but the database does not support catalogs.
 
Action
Do not try to use a catalog.
3402
The database does not support the change of isolation level.
 
Cause
An attempt was detected to change the transaction isolation level, but the database does not support changing the isolation level.
 
Action
Do not try to change the transaction isolation level.
3403
Schema/Owner is not supported in stored procedure calls, SQLProcedures, or SQLProcedureColumns.
 
Cause
Because DB2 stored procedures do not have schemas, you cannot specify a schema name in procedure-related data dictionary statements.
 
Action
Change the stored procedures in your application.
3404
Invalid stored procedure name or not authorized to invoke this procedure.
 
Cause
Either an invalid stored procedure name was specified or you do not have sufficient privileges to invoke the stored procedure.
 
Action
Make sure that you execute a stored procedure that exists in the database and that you have sufficient privileges to execute it.
3405
No default parameters are allowed in a stored procedure call.
 
Cause
Default parameters were used when invoking a stored procedure.
 
Action
Do not use the default parameters when invoking a stored procedure.
3406
Number of parameters mismatch for stored procedure.
 
Cause
A stored procedure was executed, and the number of parameters did not correspond with the stored procedure definition.
 
Action
Change the number of parameters specified in your application.
3407
Literals are not supported as stored procedure parameters.
 
Cause
Literals are used for stored procedure parameters.
 
Action
Change the stored procedure in your application so that it does not use literals.
3408
Stored procedures can no longer be executed because a SET CURRENT SQLID occurred.
 
Cause
After issuing a a SET CURRENT SQLID, it is no longer possible to execute stored procedures.
 
Action
Change your application.
3409
The kind (in, out or in/out) of a stored procedure parameter as specified by the SequeLink Client does not match with the stored procedure definition.
 
Cause
An invalid type of a stored procedure parameter was specified.
 
Action
Change the type of the stored procedure parameter specified in your application.
3410
The stored procedure cannot handle NULL values.
 
Cause
A NULL value was specified for a stored procedure parameter.
 
Action
Change the value for the stored procedure parameter specified in your application.
3411
Thread to DB2 could not be opened. Either a resource is unavailable or the requested resource (plan) is not known to DB2.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3412
Info about DB2 connection could not be retrieved.
 
Cause
The SequeLink Server attempted to retrieve DB2-specific information.
 
Action
Check your service debug log file for details about this error.
3413
More result sets have to be returned than defined.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3414
Parameter list contains invalid data type.
 
Cause
The parameter list of a stored procedure contains an invalid or unsupported data type.
 
Action
Change the stored procedure in your application.
3415
Conversion of a floating point number to a SequeLink decimal has failed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3416
Some bind variables have not been defined.
 
Cause
Some required parameter markers have not been defined by the application.
 
Action
Correct your application.
3417
Invalid data type conversion requested.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3418
UIDMap associated with the service not found.
 
Cause
The specified UID Map could not be located.
 
Action
Make sure that the name of the UID Map you specify in the MVSServiceUIDMap service attribute is correct. For more information about valid values for SequeLink service attributes, refer to the SequeLink Administrator's Guide.
3419
Access denied, user cannot be found in UIDMap.
 
Cause
The specified user was not found in the UID Map.
 
Action
Make sure that you have correctly defined the specified user in the UID Map. Also, make sure that you have specified the correct UID Map in the MVSServiceUIDMap service attribute. For more information about valid values for SequeLink service attributes, refer to the SequeLink Administrator's Guide.
3420
Select statement not allowed in batch processing.
 
Cause
You cannot execute a Select statement in a batch of statements.
 
Action
Change your application so that Select statements are not included in the batch.
3421
The maximum number of concurrent SQL statements is reached.
 
Cause
Too many statements are open at the same time.
 
Action
Close some statements before attempting to open a new statement.
3422
Invalid value specified for scope.
 
Cause
The value for the scope input parameter of SQLSpecialColumns or GetBestRowIdentifier is not valid.
 
Action
Contact DataDirect Technologies technical support.
3423
Schema name specified too long.
 
Cause
The schema name parameter of a data dictionary statement was too long.
 
Action
Change the schema name in your application.
3424
Table name specified too long.
 
Cause
The table name parameter of a data dictionary statement was too long.
 
Action
Change the table name parameter in your application.
3425
Filter value specified too long.
 
Cause
The filter value parameter of a data dictionary statement was too long.
 
Action
Change the filter value in your application.
3426
Column value specified too long.
 
Cause
The value of a column you specified was too long.
 
Action
Change the column value in your application.
3427
No row for parameter in SYSIBM.SYSPARMS.
 
Cause
SYSIBM.SYSPARMS contains a row for each parameter of a stored procedure. SequeLink could not find a row for at least one of the parameters.
 
Action
Check your procedure definition. Re-issue the call procedure. If the problem persists, contact DataDirect Technologies technical support.
3428
Procedurename specified too long.
 
Cause
The length of the unqualified name of a stored procedure cannot exceed 18 characters.
 
Action
Correct the name of the stored procedure and re-issue the catalog statement.
3429
Procedure parameter name specified too long.
 
Cause
The length of the name of a stored procedure parameter cannot exceed 18 characters.
 
Action
Correct the name of the stored procedure parameter and re-issue the catalog statement.
3430
A valid database context could not be found.
 
Cause
A valid database context could not be found.
 
Action
Contact DataDirect Technologies technical support.
3431
A database context could not be created.
 
Cause
A database context could not be created.
 
Action
A VAID050E message is generated and written to the service debug log. Contact your system administrator.
3432
The database context could not be added to the context pool.
 
Cause
The database context could not be added to the context pool, because no virtual storage could be obtained.
 
Action
None.
3433
The database context could not be switched.
 
Cause
The database context could not be switched.
 
Action
A VAID050E message is generated and written to the service debug log. Contact your system administrator.
3434
Invalid literal.
 
Cause
A literal in the stored procedure is invalid.
 
Action
Make sure that the character literals are enclosed in quotes and that numeric literals have a valid value.
3435
Literal cannot be an output parameter.
 
Cause
A literal cannot be used as an output parameter.
 
Action
Use a bind variable for the output parameter and re-issue the call procedure.
3436
Datatype not supported for literals.
 
Cause
An unsupported data type was used for a literal. The stored procedure could not be executed.
 
Action
Use a bind variable for the literal and re-issue the call procedure.
3437
Literals and bind variables cannot be mixed.
 
Cause
A combination of literals and bind variables cannot be used when calling a stored procedure.
 
Action
Make sure that you use only literals or only bind variables when calling a stored procedure.
3438
The maximum size of a large object output parameter is exceeded.
 
Cause
A stored procedure was called that returns a LOB output parameter that exceeds the value set by the DataSourceDB2MaxLobSize service attribute for this data source. The data is not returned.
 
Action
Increase the value of the DataSourceDB2MaxLobSize service attribute or return a smaller LOB output parameter in the stored procedure.
3439
The requested DB2 subsystem is not active.
 
Cause
The requested DB2 subsystem is not active.
 
Action
Contact your system administrator to start the DB2 subsystem.
3440
A required service/data source attribute is not found; contact your system administrator.
 
Cause
A required service or data source attribute could not be found in the configuration file.
 
Action
A message that identifies the missing attribute is generated and sent to the service debug log. Contact your system administrator.
3441
No Uidmap associated with service, anonymous logon denied.
 
Cause
The service is not configured correctly. A UIDMap is required to allow anonymous logon, but no UIDMap is associated with the service.
 
Action
Create a UIDMap and add the MVSServiceUIDMap service attribute to the service.
3442
Uidmap does not contain wildchar entry, anonymous logon denied.
 
Cause
The UIDMap associated with the service does not contain a wild character entry (*).
 
Action
Add a wild character entry (*) to the UIDMap associated with the service.
3443
Cannot logon to the database.
 
Cause
The logon to DB2 failed.
 
Action
See accompanying messages and the Server VAILOG for the DB2 reason code.
3444
The maximum number of database Threads is reached.
 
Cause
The Service is exceeding the value set for the ServiceDB2MaxThread service attribute.
 
Action
Increase the value of the ServiceDB2MaxThread service attribute.
3445
Virtual storage limits exceeded.
 
Cause
Insufficient storage was available at the server. No more DB2 connections could be accepted.
 
Action
Try the connection again.
3446
DataSourceTransactionIsolation attribute has an unsupported value.
 
Cause
DataSourceTransactionIsolation attribute missing.
 
Action
Ask the administrator to add the DataSourceTransactionIsolation attribute.
3447
Abend occurred due to an internal error in IBM DATABASE 2 (DB2) processing.
 
Cause
DB2 had been abended and trapped within the session.
 
Action
Ask the system operator to look for message VAI046 in VAILOG.
3448
This functionality is not supported for this database version.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3449
Maximum cputime limit has been exceeded, DB2 thread aborted.
 
Cause
The session has exceed its maximum CPU time as set by the DataSourceMaxCpuTime attribute.
 
Action
None.
3501
Unsupported transaction isolation level.
 
Cause
An attempt was detected to change the transaction isolation level to an isolation level that is unsupported by Informix.
 
Action
Use a transaction isolation level that is supported by the Informix database.
3502
Internal error. Failed to translate the user specified statement to an Informix-specific format.
 
Cause
The SequeLink Server SQL Parser could not parse the SQL statement.
 
Action
Correct the syntax error in the SQL statement that you are trying to prepare or execute.
3503
An Informix DECIMAL value can only be converted to a SequeLink decimal value.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3504
A SequeLink decimal value can only be converted to an Informix NUMBER value.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3505
Internal error. An unsupported action is encountered in a fetch callback routine.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3506
Numeric value truncated.
 
Cause
The precision or scale of a numeric value is larger than Informix expects.
 
Action
Make sure the numeric value that you send to Informix corresponds to the columns definition.
3507
An Informix timestamp value can only be converted to a SequeLink timestamp value.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3508
A SequeLink timestamp value can only be converted to an equivalent Informix timestamp value.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3509
Output and Input-Output variables not supported.
 
Cause
An attempt was detected to bind Output or Input/Output variables, which are not supported by Informix.
 
Action
SequeLink returns Informix return parameters as result sets. Fetch the result sets.
3510
Data source not found.
 
Cause
An invalid server data source was specified at connection time.
 
Action
Make sure the server data source you want to connect to exists, or use the default server data source.
3511
Get diagnostics failed.
 
Cause
SequeLink could not obtain the error message text from Informix.
 
Action
Contact DataDirect Technologies technical support.
3512
Insertion of Smart BLOB failed.
 
Cause
SequeLink could not insert a smart BLOB (data type BLOB or CLOB).
 
Action
Make sure that a default sbspace has been created in Informix. Refer to the Informix documentation for information about onconfig.
3513
Set catalog name not supported.
 
Cause
The application tried to switch the current database during the connection. This is not supported by Informix.
 
Action
Specify your database at connection time. Do not change databases after connection.
3514
Invalid environment variables during establishing connection to database.
 
Cause
Either or both of the environment variables INFORMIXDIR or INFORMIXSERVER are not specified correctly in the DataSourceINFInformixDir and DataSourceINFInformixServer service attributes.
 
Action
Specify either or both of the INFORMIXDIR or INFORMIXSERVER environment variables in the DataSourceINFInformixDir and DataSourceINFInformixServer service attributes.
3515
Database name not specified.
 
Cause
A connection was attempted without specifying a valid database name.
 
Action
Check the connection settings and make sure a valid database name is passed to the server.
3516
Stat, ClsDb, Commit, Rollback functions not allowed for execution.
 
Cause
An attempt was made to execute the native Informix transaction functions.
 
Action
Use only the SequeLink Client's transaction functions for transaction handling.
3517
Prepared statement is not described by Informix.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3518
Informix function failed while reading smart LOB data.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
3519
Select statements cannot be executed via NImmediate.
 
Cause
An attempt was made to execute statements that generate result sets in a batch of JDBC statements.
 
Action
Make sure that every statement in a statement batch is a DDL or a statement that generates RowCounts.
4301
Operation Failed.
 
Cause
Never generated.
 
Action
None.
4302
Error configuring the JDBC DataSource
 
Cause
The logWriter writer could not be set because the DataDirect Spy jar file was not on the class path.
 
Action
Verify that the spy.jar file is on the class path.
4303
JDBC DataSource not defined.
 
Cause
The SequeLink Client for JDBC DataSource object used by the resource adapter was not initialized correctly.
 
Action
Contact DataDirect Technologies technical support. The subclasses of JCAManagedConnectionFactory should ensure that a SequeLink for JDBC DataSource object is passed to the JCAManagedConnectionFactory constructor. It is an internal resource adapter error if it does not.
4304
The physical connection is invalid.
 
Cause
An operation was attempted on a ManagedConnection that has been closed.
 
Action
Try the connection using an open ManagedConnection. Do not use a ManagedConnection that has been closed.
4305
Reauthorization of JDBC Connections is not allowed.
 
Cause
An attempt was made to reuse a ManagedConnection with a user ID and password that is different from the user ID and password used to create the ManagedConnection.
 
Action
Verify that the user ID and password supplied to the getConnection(String userId, String password) method of a particular ConnectionFactory instance is the same for each invocation.
4306
The supplied connection handle is invalid.
 
Cause
An attempt was made to associate a ManagedConnection with a connection handle that is not an instance of JCAConnection.
 
Action
The Connection object passed to ManagedConnection.associateConnection must be an instance of a JCAConnection object.
4307
Error fetching local transaction object.
 
Cause
Never generated.
 
Action
None.
4308
Error fetching meta data from resource.
 
Cause
An error was generated while fetching information needed for the ManagedConnectionMetaData from the JDBC connection used by the resource adapter.
 
Action
The exception generated by the JDBC connection is chained to this exception. Use the method ResourceException.getLinkedException to retrieve the exception chained to this exception. The message of the chained exception will indicate the cause of the problem.
4309
The object is closed.
 
Cause
An attempt was made to use a JCAConnection object that has already been closed.
 
Action
Do not use a JCAConnection object after it has been closed.
4310
The Connection Factory is invalid.
 
Cause
An attempt was made to use a Connection Factory object that was not initialized correctly.
 
Action
Contact DataDirect Technologies technical support. A JCAManageConnectionFactory should never create a Connection Factory object that is invalid. It is an internal resource adapter error if it does.
4311
Can not fetch XAResource. Resource adaptor does not support XA Transactions.
 
Cause
The resource adapter does not support XA Transactions.
 
Action
Do not use XA Transactions with the resource adapter.
4312
The Managed Connection Factory is invalid.
 
Cause
A ManagedConnectionFactory was not specified when creating a new ManagedConnection while using the default connection manager included with the resource adapters.
 
Action
Contact DataDirect Technologies technical support. A JCAConnectionFactory should always specify a valid ManagedConnectionFactory when creating a new ManagedConnection. It is an internal resource adapter error if it does not.
4313
Unsupported Method.
 
Cause
An attempt to call unlock on a connection handle that does not contain a valid physical connection. A connection handle will not contain a valid physical connection if the connection handle was closed.
 
Action
Do not call unlock on a connection handle that has been closed.
5001
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5002
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5003
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5004
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5011
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5012
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5013
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5014
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5015
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5021
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5022
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5023
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5024
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5031
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5033
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5034
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5043
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5044
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5045
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5046
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5047
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5052
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5058
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5059
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5060
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5061
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5065
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5067
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5069
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5070
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5071
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5101
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5102
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5103
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5104
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5105
A memory allocation error occurred.
 
Cause
SequeLink was unable to allocate the necessary amount of memory.
 
Action
Increase the available memory for your application.
5106
A memory allocation error occurred.
 
Cause
SequeLink was unable to allocate the necessary amount of memory.
 
Action
Increase the available memory for your application.
5107
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5108
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5109
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5110
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5111
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5112
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5113
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5150
You cannot connect to a server that is not a SequeLink Server.
 
Cause
An attempt was detected to connect to a server that is not a SequeLink Server.
 
Action
Make sure that the connection information configured at the SequeLink Client is specified correctly to connect to the SequeLink Server.
5151
A protocol error occurred during the connection setup.
 
Cause
The SequeLink Client is not compatible with the version of the SequeLink Server to which it is connecting.
 
Action
Verify that the versions of your SequeLink Client and SequeLink Server are compatible. Contact DataDirect Technologies technical support, if necessary.
5152
You are trying to connect to a server that is not running the correct version of SequeLink Server.
 
Cause
An attempt was detected to connect to a SequeLink Server running an incompatible version of SequeLink.
 
Action
Verify that the versions of your SequeLink Client and SequeLink Server are compatible. Contact DataDirect Technologies technical support, if necessary.
5153
The SequeLink Client failed to retrieve the connection parameters from the LDAP server.
 
Cause
The SequeLink Client failed to retrieve connection information from the LDAP server.
 
Action
Typically, this error is followed by other errors containing more detailed information. Use these details to troubleshoot the problem.
5154
The TCP/IP host was not specified.
 
Cause
The TCP/IP host of the SequeLink Server was not specified in the connection information.
 
Action
Make sure that the connection information configured at the SequeLink Client specifies the TCP/IP host of the SequeLink Server.
5155
The TCP/IP port was not specified.
 
Cause
The TCP/IP port of the SequeLink Server was not specified in the connection information.
 
Action
Make sure that the connection information configured at the SequeLink Client specifies the TCP/IP port of the SequeLink Server.
5156
LDAP Distinguished Name is missing.
 
Cause
The LDAP Distinguished Name that identifies a unique LDAP entry was not specified in the connection information to the LDAP server.
 
Action
Make sure that the connection information configured at the SequeLink Client specifies the Distinguished Name of the LDAP entry.
5157
The specified LDAP entry didn't specify all required attributes to connect to the SequeLink Server.
 
Cause
The specified LDAP entry, identified by the Distinguished Name, did not specify all the required attributes to connect to the SequeLink Server.
 
Action
Check the LDAP entry in the LDAP directory to make sure that the LDAP entry specifies the complete connection information for SequeLink connections. For information about configuring LDAP for SequeLink, refer to the SequeLink Administrator's Guide.
5158
LDAP return code: xxxx (xxxx).
 
Cause
An LDAP return code was generated by the underlying LDAP implementation. The return code contains parameters that provide more detailed information.
 
Action
Refer to your LDAP product documentation to reference the return code generated by LDAP.
5159
The initialization of the LDAP client failed. Possible cause: memory allocation failure.
 
Cause
The initialization of the LDAP client failed. A memory allocation failure may have occurred.
 
Action
Increase the available memory for your application.
5160
The specified LDAP entry could not be found. Part of the Distinguished Name identifying the entry as "xxxx" was returned.
 
Cause
The specified LDAP entry, identified by the Distinguished Name, could not be found.
 
Action
Make sure that you specified a correct LDAP entry Distinguished Name.
5161
Failed to load the LDAP library: xxxx.
 
Cause
SequeLink Client could not load the specified LDAP shared library.
 
Action
Check your SequeLink Client installation.
5162
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5163
LDAP is not supported on this platform.
 
Cause
The attempted operation is supported only on platforms that support LDAP.
 
Action
Try the operation on a SequeLink Client running on a platform that supports LDAP.
5164
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5200
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5201
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5202
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5203
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5204
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5205
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5206
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5223
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5241
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5270
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5290
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5300
Failed to load the transliteration file `xxxx'.
 
Cause
The transliteration file `xxxx' failed to load.
 
Action
Check your SequeLink Client installation.
5301
The transliteration file `xxxx' is corrupt.
 
Cause
The transliteration file `xxxx' is damaged.
 
Action
Check your SequeLink Client installation.
5302
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5303
Failed to load the transliteration file `xxxx'.
 
Cause
The transliteration file `xxxx' failed to load.
 
Action
Check your SequeLink Client installation.
5304
The transliteration file `xxxx' is corrupt.
 
Cause
The transliteration file `xxxx' is corrupt.
 
Action
Check your SequeLink Client installation.
5305
An internal error occurred. Failed to load XlatTransliterator for 'transliteration table'.
 
Cause
The creation of a transliteration table failed.
 
Action
Reduce the memory load of the application.
5306
An internal error occurred. Failed to load IcuTransliterator for 'codepage'.
 
Cause
The creation of a transliteration code page handled by the ICU failed.
 
Action
Check the validity of the indicated code pages or encodings.
5320
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5321
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5330
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5331
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5340
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
5350
An authentication mechanism could not be successfully negotiated.
 
Cause
The SequeLink Server did not specify an authentication mechanism supported by the SequeLink Client.
 
Action
Make sure that the SequeLink Server specifies an authentication mechanism supported by the SequeLink Client. Refer to the SequeLink Administrator's Guide for information on configuring authentication.
5501
Memory allocation failure.
 
Cause
Insufficient memory could be allocated.
 
Action
Free memory resources. If the problem persists, contact DataDirect Technologies technical support.
5502
Failed to initialize SequeLink Manager.
 
Cause
The SequeLink Manager could not be initialized.
 
Action
Contact DataDirect Technologies technical support.
5503
Internal SequeLink Manager error detected (I=xxxxd).
 
Cause
An internal error occurred in the SequeLink Manager.
 
Action
Contact DataDirect Technologies technical support.
5504
Unknown command <name> entered.
 
Cause
An incorrect SequeLink Manager command was entered.
 
Action
Check the SequeLink Manager command help to verify the command.
5505
Specified argument not valid for the given command.
 
Cause
An incorrect parameter for a SequeLink Manager command was entered.
 
Action
Check the SequeLink Manager command help to verify the command parameter.
5506
Failed to open file <file name>.
 
Cause
The specified file could not be opened.
 
Action
Make sure that the specified file exists. If it does, make sure that you have sufficient privileges to open and read the file.
5507
Argument out of range.
 
Cause
A parameter for a SequeLink Manager command was too long.
 
Action
Check the SequeLink Manager command help to verify the command parameter.
5508
Required parameter <name> for command not specified.
 
Cause
A required parameter for the SequeLink Manager command was not specified.
 
Action
Check the SequeLink Manager command help to verify the required parameters for the command.
5509
Command not available for current configuration.
 
Cause
The SequeLink Manager command entered is not supported for the current configuration.
 
Action
Check the SequeLink Manager command help to verify the command.
5510
Failed to display help item.
 
Cause
SequeLink Manager help could not be displayed for the specified command. This is an internal error.
 
Action
Contact DataDirect Technologies technical support.
5511
No configuration opened.
 
Cause
A SequeLink Manager command was entered that required an open configuration.
 
Action
Check the SequeLink Manager command help to verify the command.
5513
Numeric value for parameter required.
 
Cause
A parameter for the specified SequeLink Manager command required a numeric value.
 
Action
Check the SequeLink Manager command help to verify the parameters for the command.
5514
An invalid service template ID was specified.
 
Cause
An invalid SequeLink service template ID was specified.
 
Action
Make sure that you specify the correct SequeLink service template ID. For more information about template IDs, refer to the SequeLink Administrator's Guide.
5515
Invalid option <name>.
 
Cause
An invalid option for the specified SequeLink Manager command was supplied.
 
Action
Check the SequeLink Manager command help to verify the specified command.
5516
Invalid value for option <name>.
 
Cause
An invalid value for the specified SequeLink Manager command option was supplied.
 
Action
Check the SequeLink Manager command help to verify the command.
5517
Help topic not found.
 
Cause
The topic specified with the SequeLink Manager help command could not be found.
 
Action
Specify help without arguments to see the topics for which help is available.
5518
Invalid attribute index syntax.
 
Cause
The attribute array index specified with the attribute name has an incorrect syntax. The correct syntax for an attribute array index is, for example, AttributeName[25].
 
Action
Correct the syntax.
5519
Invalid log level <name>.
 
Cause
The log level name in a SequeLink Manager command that was entered was invalid.
 
Action
Check the SequeLink Manager command help to verify log level names.
5520
Invalid log value <name>.
 
Cause
The value specified with the log level name in a SequeLink Manager command that was entered was invalid.
 
Action
Check the SequeLink Manager command help to verify log level values.
5522
Invalid numeric value <value>.
 
Cause
A value was specified in a SequeLink Manager command that could not be converted to a numeric value.
 
Action
Specify a valid numeric value for the SequeLink Manager command.
5523
AutoSave option is already activated.
 
Cause
The SequeLink Manager command SaveConfig was issued when the AutoSave setting was activated.
 
Action
None. This message is informational only.
5524
Quote mismatch.
 
Cause
Syntax error. No closing quote was typed.
 
Action
Correct the syntax.
5525
System execution returned a non-zero return code (return code <value>).
 
Cause
An application or operating system command failed. The operating system command specified with the '!' command returned a non-zero return code.
 
Action
Refer to the command's documentation, typically the operating system command documentation, for more information.
5526
Failed to open a pipe to <application>.
 
Cause
A pipe to the specified application could not be opened.
 
Action
Make sure that the MoreExecPath is configured correctly.
The following example is for HP-UX. Your path to the more command may be different, depending on the version of UNIX you are using.
1 Stop your SequeLink services.
2 Add the following lines to your swcla.ini file:

[CLA Settings]

MoreExePath=/usr/bin/more

3 Restart your SequeLink services.
5527
When handling commands interactive, no output or error file can be specified.
 
Cause
An output or error file was specified on the command line, but no input file was specified.
 
Action
Correct the command line by adding the input file option or by removing the output or error file option.
5528
Invalid flag <name>.
 
Cause
An invalid command-line flag was specified.
 
Action
Specify a valid command-line flag.
5529
Invalid profile level <name>.
 
Cause
An invalid profile level in a SequeLink Manager command was specified.
 
Action
Check the SequeLink Manager command help to verify profile levels.
5530
Invalid name or ID <value> for profile level <name>.
 
Cause
An invalid profile name or ID for the specified profile level in a SequeLink Manager command was supplied.
 
Action
Check the SequeLink Manager command help to verify profile levels and their names or IDs.
5531
Too many parameters specified.
 
Cause
Too many arguments were provided with a SequeLink Manager command.
 
Action
Make sure that the SequeLink Manager command provides the correct number of parameters.
5532
An attribute index must be specified for this attribute.
 
Cause
When deleting or replacing an array attribute with a SequeLink Manager command, an index must always be specified.
 
Action
Make sure that an index is specified and the syntax is correct.
5533
Specified attribute is no array attribute.
 
Cause
An index was provided in a SequeLink Manager command with an attribute that is not an array attribute.
 
Action
Make sure that no index is specified and the syntax is correct.
6000
Error loading error messages.
 
Cause
An unexpected error occurred while loading the error messages.
 
Action
Contact DataDirect Technologies technical support.
6001
{0}
 
Cause
Generic error occurred. At runtime, an error message from the JDK will be displayed.
 
Action
Check the error message {0} for the appropriate action.
6002
Specified parameter values not supported for method: {0}
 
Cause
The parameters specified for method {0} contain invalid values.
 
Action
Check your JDBC application.
6003
Unsupported method: {0}
 
Cause
The method {0} is not supported by this version of the JDBC driver.
 
Action
Verify the method {0} in your JDBC application.
6004
Invalid operation for the current cursor position.
 
Cause
This method invocation is only valid when the result set has a current row.
 
Action
Check your JDBC application.
6005
Invalid column name: {0}
 
Cause
The specified column {0} was not found. An invalid column name was specified.
 
Action
Check your JDBC application.
6006
Column index {0} is out of range.
 
Cause
Your JDBC application specified a column index {0} that is out of bounds.
 
Action
Check your JDBC application.
6007
ResultSet can not re-read row data for column {0}.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
6008
Unsupported data conversion.
 
Cause
The requested data conversion is not supported by this version of the JDBC driver.
 
Action
Verify the requested conversion in your JDBC application.
6009
Object has been closed.
 
Cause
Object is closed. The JDBC application used an illegal method on a closed object.
 
Action
Correct your JDBC application.
6010
Invalid parameter binding(s).
 
Cause
The parameter must be registered prior to getXXX().
 
Action
Correct your JDBC application.
6011
Invalid call Statement method: {0}
 
Cause
The methods on Statement that have a SQL statement as parameter, like execute(sql) and addBatch(sql), are not supported on PreparedStatements.
 
Action
Check your JDBC application.
6012
No ResultSet set was produced.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
6013
No rows affected.
 
Cause
The statement did not generate a row count. executeUpdate() cannot be used on a statement that returns a result set.
 
Action
Correct your JDBC application.
6014
Invalid operation. Statement not in an executed state.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
6017
Unexpected internal error.
 
Cause
An unexpected internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6018
Invalid SQL specified.
 
Cause
The specified SQL statement is not valid.
 
Action
Correct your JDBC application.
6019
Method not valid for read-only ResultSet : {0}
 
Cause
The method {0} can only be called on an updatable result set.
 
Action
Correct your JDBC application.
6020
Method not valid for TYPE_FORWARD_ONLY ResultSet : {0}.
 
Cause
The method {0} can only be called on a scrollable result set.
 
Action
Correct your JDBC application.
6021
Can't start a cloned connection while in manual transaction mode.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
6022
The specified SQL type is not supported by this driver.
 
Cause
Your application uses a SQL type that is not supported by this driver.
 
Action
Check your JDBC application.
6023
Cannot obtain a connection to perform the operation.
 
Cause
The maximum number of statements are in use.
 
Action
Check your JDBC application.
6024
Value can not be converted to requested type.
 
Cause
The data type conversion for the specified column failed.
 
Action
Correct your JDBC application.
6025
Object has been closed.
 
Cause
Object is closed. The JDBC application used an illegal method on a closed object.
 
Action
Correct your JDBC application.
6026
Can't start manual transaction mode because there are cloned connections.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
6027
Not in local manual transaction mode.
 
Cause
The application called a method that can only be used in manual transaction mode.
 
Action
Correct your JDBC application.
6029
Unable to connect. DataSource property {0} must be specified.
 
Cause
Insufficient information to connect was supplied. Missing parameters are: {0}.
 
Action
Make sure that you specify all required connection properties. For more information about all possible connection properties, refer to the SequeLink Administrator's Guide.
6030
Unable to connect. Invalid URL.
 
Cause
Insufficient information to connect was supplied. Missing parameters are: {0}.
 
Action
Make sure that you specify the connection URL completely. For information about the syntax of the connection URL, refer to the SequeLink Administrator's Guide.
6031
The input stream contained a different number of bytes than specified.
 
Cause
The application requested more bytes than available in the input stream.
 
Action
Check your JDBC application.
6032
The hexadecimal string is invalid.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
6033
Unable to determine the type of the specified object.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
6036
Syntax error at token {0}, line {1} offset {2}.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
6037
Unexpected end of escape.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
6038
Error setting up static cursor cache.
 
Cause
An unexpected error occurred while setting up the static cursor cache.
 
Action
Obtain the next exception for more information. If necessary, contact DataDirect Technologies technical support.
6039
Error writing data to static cursor cache.
 
Cause
An unexpected error occurred while writing to the static cursor cache set up.
 
Action
Obtain the next exception for more information. If necessary, contact DataDirect Technologies technical support.
6040
Error reading data from static cursor cache.
 
Cause
An unexpected error occurred while writing to the static cursor cache set up.
 
Action
Obtain the next exception for more information. If necessary, contact DataDirect Technologies technical support.
6041
0 is not a valid row parameter value for the ResultSet.Absolute method.
 
Cause
0 is not a valid value for the row parameter of the method ResultSet/Absolute.
 
Action
Correct your application.
6042
Invalid call to ResultSet.Relative because there is no current row.
 
Cause
This method invocation is only valid when the result set has a current row.
 
Action
Check your JDBC application.
6043
An I/O error while manipulating the sort index.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
6044
The evaluation period for this driver has expired. Contact DataDirect Technologies SupportLink to purchase a valid license.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
6045
A table name must be supplied.
 
Cause
The application did not specify a table name for the DatabaseMetaData.getIndexInfo method.
 
Action
Correct your application.
6046
Scrolling request was downgraded.
 
Cause
The result set type was downgraded.
 
Action
Refer to the SequeLink Developer's Reference for information about restrictions on scrollable cursors.
6047
Updateable concurrency not supported, downgraded to readonly concurrency.
 
Cause
The result set concurrency was downgraded.
 
Action
Refer to the SequeLink Developer's Reference for information about restrictions on updatable cursors.
6048
Pooled connection reclaimation not supported.
 
Cause
The JDBC driver does not support reclaiming open connections.
 
Action
Check your JDBC application.
6049
Login has timed out.
 
Cause
A timeout expired.
 
Action
Verify that the SequeLink Server is running and that you have specified the correct network address of the host. If your configuration is correct, increase the connection timeout value.
6050
This driver is locked for use with embedded applications.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
6052
There was an error(s) in processing the batch command. Use getNextException() for details.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
6053
Statements that produce result sets are not allowed in batch commands.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
6054
ResultSet is not updateable.
 
Cause
The application issued a method on a read only result set that can only be called on an updatable result set.
 
Action
Check your JDBC application.
6055
Can not update, the specified column is not writable.
 
Cause
The application tried to update a read only column.
 
Action
Check your JDBC application.
6056
Row update actually caused {0} rows to be updated.
 
Cause
ResultSet.updateRow updated more than one row.
 
Action
Make sure that your application selects the primary key of the table.
6057
Row update failed.
 
Cause
An exception occurred while updating the ResultSet.
 
Action
Obtain the next exception for more information. If necessary, contact DataDirect Technologies technical support.
6058
Invalid operation while positioned on the insert row.
 
Cause
The application called a method {0} that cannot be called while positioned on the insert row.
 
Action
Correct your JDBC application.
6059
Row delete actually caused {0} rows to be deleted.
 
Cause
ResultSet.deleteRow updated more than one row.
 
Action
Make sure that your application selects the primary key of the table.
6060
Row delete failed.
 
Cause
An exception occurred while deleting a row from the ResultSet.
 
Action
Obtain the next exception for more information. If necessary, contact DataDirect Technologies technical support.
6061
Must be on the insert row to insert.
 
Cause
This method invocation is only valid when the cursor is positioned on the insert row.
 
Action
Check your JDBC application.
6062
Row insert failed.
 
Cause
An exception occurred while inserting a row into the ResultSet.
 
Action
Obtain the next exception for more information. If necessary, contact DataDirect Technologies technical support.
6063
Error closing Blob or Clob object.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
6064
The search pattern specified is too large.
 
Cause
The search pattern used is too large.
 
Action
Try to reduce the size of the search pattern if possible.
6065
The buffer supplied is too small.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
6066
The size of the Blob is too big to be cached.
 
Cause
The size of the Blob is too large to be cached.
 
Action
If possible, try to reduce the size of the Blob.
6068
Can't search Blobs larger than 2 GB.
 
Cause
The size of the Blob is too large to be searched.
 
Action
If possible, try to reduce the size of the Blob.
6069
One or more arguments supplied to method {0} are invalid.
 
Cause
The parameters specified for method {0} contain invalid values.
 
Action
Check your JDBC application.
6070
Invalid character encoding for Clob.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
6071
Invalid position. The Clob data uses UCS2 character encoding and current position is odd.
 
Cause
This Clob data uses UCS-2 character encoding so the position cannot be an odd value.
 
Action
Check your JDBC application.
6072
Can't set autocommit to true during global transaction.
 
Cause
You cannot set Autocommit to On for global transactions.
 
Action
Check your JDBC application.
6073
Can't commit using XAConnection during global transaction.
 
Cause
You cannot call commit during a global transaction.
 
Action
Check your JDBC application.
6074
Can't rollback using XAConnection during global transaction.
 
Cause
You cannot call rollback during a global transaction.
 
Action
Check your JDBC application.
6076
Cannot insert an empty row into this ResultSet.
 
Cause
Your database does not support inserting an empty row into a result set.
 
Action
Check your JDBC application.
6077
The position specified is past the end of the BLOB or CLOB.
 
Cause
One of the specified parameters contains an invalid value.
 
Action
Check your JDBC application.
6078
The operation was cancelled at the user's request.
 
Cause
The user cancelled the execute on another thread.
 
Action
None.
6079
All of the data supplied could not be written.
 
Cause
One of the specified parameters contains an invalid value.
 
Action
Check your JDBC application.
6080
The specified Savepoint does not have a numeric ID.
 
Cause
This Savepoint does not have a numeric ID.
 
Action
Check your JDBC application.
6081
The specified Savepoint is un-named.
 
Cause
This Savepoint does not have a name.
 
Action
Check your JDBC application.
6082
The specified Savepoint is invalid.
 
Cause
The application specified an invalid Savepoint.
 
Action
Check your JDBC application.
6083
Discarded ResultSet during executeUpdate.
 
Cause
The application used executeUpdate for a SQLStatement that also returns Result Sets.
 
Action
Check your JDBC application if you really want to discard the result sets. Otherwise, modify your application so that it uses 'execute' instead of 'executeUpdate'.
6084
Discarded rows affected count during executeQuery.
 
Cause
The application used executeQuery for a SQLStatement that also returns update counts.
 
Action
Check your JDBC application if you really want to discard the update counts. Otherwise, modify your application so that it uses 'execute' instead of 'executeUpdate'.
6085
Execution timeout expired.
 
Cause
A timeout expired.
 
Action
Check the SQL statement used by your application. If it is correct, increase the query timeout value.
6086
Can't set a savepoint during global transaction.
 
Cause
You cannot set a savepoint during global transactions.
 
Action
Check your JDBC application.
6087
Can't release a savepoint during global transaction.
 
Cause
You cannot release a savepoint during global transactions.
 
Action
Check your JDBC application.
6088
The requested parameter metadata is not available for the current statement.
 
Cause
The requested parameter metadata is not available.
 
Action
Check your JDBC application.
6089
On a deleted row. Can not perform operation.
 
Cause
The method invocation is only valid if not positioned on a deleted row.
 
Action
Check your JDBC application.
6501
A required input parameter could not be read.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6502
A required output parameter could not be written.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6503
A parameter was malformed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6504
An unsupported mechanism was requested.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6505
An invalid name was supplied.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6506
A supplied name was of an unsupported type.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6507
Incorrect channel bindings were supplied.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6508
An invalid status code was supplied.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6509
A token had an invalid signature.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6510
No credentials were supplied.
 
Cause
An error occurred during OSLogon processing because the client application did not provide a user name or password, and the application disabled prompting for this information.
 
Action
Make sure the connection information provided by the application contains all required attributes.
6511
No context has been established.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6512
A token was invalid.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6513
A credential was invalid.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6514
The referenced credentials have expired.
 
Cause
An error occurred during authentication processing because the password for the specified user has expired.
 
Action
Update the password on the server host.
6515
The context has expired.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6516
A generic error occurred. Minor MGGS state is xxxx.
 
Cause
An error occurred during authentication processing. The accompanying error message (which is different from the text above) indicates the exact nature of the problem; for example, User not found or Invalid password provided.
 
Action
Make sure that the logon information provided by your client application is correct.
6517
The quality-of-protection requested could not be provided.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6518
The operation is forbidden by local security policy.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6519
The operation or option is unavailable.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6520
The requested credential element already exists.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6521
The provided name was not a mechanism name.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6522
Failed to load MGSS mechanism.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6523
Memory allocation failed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6524
Context call failed.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6525
Prompt for authentication information aborted by user.
 
Cause
An error occurred during authentication processing because the user cancelled from the dialog box prompting for authentication information (user name and user password).
 
Action
None.
6526
MGSS module version mismatch.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6527
MGSS module returned an unknown major status code.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6801
Name given to entity instance is longer than 8 characters.
 
Cause
An error occurred during the startup of the SequeLink Server because the service name assigned to a SequeLink service or DB2 Interface was longer than 8 characters.
 
Action
Make sure that the service name of the SequeLink service or DB2 interface does not exceed 8 characters. Change the configuration of the SequeLink service or DB2 interface, if necessary. Then, restart the SequeLink Server.
6802
No unique agent service found.
 
Cause
An error occurred during the startup of the SequeLink Server because a SequeLink Agent service was not created for the SequeLink Server or more than one SequeLink Agent service had been created for the SequeLink Server. The SequeLink Server will not start.
 
Action
Create the missing SequeLink Agent service or delete any duplicate SequeLink Agent services in the SequeLink Server configuration.
6803
Name given to the agent service is longer than 8 characters.
 
Cause
An error occurred during the startup of the SequeLink Server because the name of a z/OS SequeLink Agent service was longer than 8 characters. The SequeLink Server will not start.
 
Action
Change the name of the z/OS SequeLink Agent service to be 8 characters or less. Then, restart the SequeLink Server.
6851
Memory allocation failure.
Cause
No memory could be allocated.
Action
Free memory resources. If the problem persists, contact DataDirect Technologies technical support.
6852
Internal SequeLink Administration error detected (I=<number>).
 
Cause
An internal error occurred in the SequeLink Manager.
 
Action
Contact DataDirect Technologies technical support.
6853
Failed to access configuration at <string>.
 
Cause
SequeLink failed to open the SequeLink configuration file because an invalid connection string to a SequeLink Agent was specified or an invalid path to a SequeLink configuration file was specified.
 
Action
Re-attempt to open the SequeLink configuration with a correct connection string or a correct path.
6854
Failed to cache configuration information.
 
Cause
An error occurred while caching configuration information from a SequeLink Agent or from a SequeLink configuration file.
 
Action
Contact DataDirect Technologies technical support.
6855
Invalid attribute ID <id>.
 
Cause
An invalid service attribute ID was specified.
 
Action
Specify a valid ID for the service attribute. For more information about specifying SequeLink service attributes, refer to the SequeLink Administrator's Guide.
6856
Value for attribute <ID or name> is no numeric value.
 
Cause
The service attribute value specified requires a numeric value.
 
Action
Specify a numeric value for the service attribute value. For more information about specifying SequeLink service attributes, refer to the SequeLink Administrator's Guide.
6858
Specified value <attribute value> for attribute <name or ID> is not valid. Values between <lower limit> and <upper limit> are valid.
 
Cause
The specified service attribute value was invalid.
 
Action
Specify the service attribute value, using a numeric value between <lower limit> and <upper limit>.
6859
Specified value <attribute value> for attribute <ID or name> is not valid.
 
Cause
The specified service attribute value was invalid.
 
Action
Specify a valid value for the service attribute.
6861
Invalid values for boolean attribute <ID or name>.
 
Cause
The specified service attribute value is not a valid boolean value.
 
Action
Specify a valid value for the service attribute.
6862
Length of string attribute <ID or name> cannot be larger then <length> characters.
 
Cause
The specified service attribute value cannot exceed the maximum string length allowed.
 
Action
Specify a valid value for the service attribute.
6863
Attribute type not supported.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
6864
Unable to determine local host name.
 
Cause
SequeLink was unable to determine the name of the local host.
 
Action
Contact DataDirect Technologies technical support.
6865
Invalid service name <service name>.
 
Cause
An invalid SequeLink service name was specified.
 
Action
Specify a valid SequeLink service name. Remember that service names are case sensitive.
6866
Invalid service template ID.
 
Cause
An invalid SequeLink service template ID was specified.
 
Action
Specify a valid SequeLink service template ID. For more information about template IDs, refer to the SequeLink Administrator's Guide.
6867
Only one agent service may be created.
 
Cause
An attempt was made to create a duplicate SequeLink Agent service.
 
Action
None.
6868
Service <service name> is still active.
 
Cause
An attempt was made to delete a SequeLink service that was still running.
 
Action
Stop the SequeLink service before you delete it.
6869
Failed to check if service <service name> is still active.
 
Cause
SequeLink could not check if the SequeLink service was active. The SequeLink service may have been experiencing heavy traffic or may have been in an incorrect state.
 
Action
Re-check the status of the SequeLink service. If the problem persists, contact DataDirect Technologies technical support.
6870
Attribute <ID or name> is not valid <object> attribute.
 
Cause
The specified attribute is not valid for the SequeLink service or server data source.
 
Action
Specify a valid attribute for the SequeLink service or server data source. For more information about specifying SequeLink service attributes, refer to the SequeLink Administrator's Guide.
6871
Attribute <ID or name> may be added only once.
 
Cause
An attempt to add an attribute that already existed in the SequeLink service or server data source configuration was detected.
 
Action
None.
6872
Attribute <ID or name> is a primary key.
 
Cause
The specified attribute is required by the SequeLink service or server data source and cannot be deleted.
 
Action
None.
6873
Attribute <ID or name> not found in <object>.
 
Cause
The specified attribute cannot be found in the SequeLink service or server data source.
 
Action
Check your SequeLink service or server data source configuration to verify that the specified attribute exists in the configuration. For more information about specifying SequeLink service attributes, refer to the SequeLink Administrator's Guide.
6874
Attribute <ID or name> must at least exist once in <object>.
 
Cause
The specified attribute could not be found in the SequeLink service or server data source.
 
Action
Check your SequeLink service or server data source configuration to verify that the specified attribute exists in the configuration. For more information about specifying SequeLink service attributes, refer to the SequeLink Administrator's Guide.
6875
Function not available for platform configuration.
 
Cause
The specified administrative function was not supported for the server operating system.
 
Action
None.
6877
Monitor not available for service <service name>.
 
Cause
Monitoring has not been enabled for this SequeLink service.
 
Action
Enable a monitoring profile for the service, and make sure that the service is active. For more information about enabling profiles for a SequeLink service, refer to the SequeLink Administrator's Guide.
6878
Invalid data source name <service name>.
 
Cause
An invalid server data source name was specified.
 
Action
Specify a correct server data source name. Server data source names are case-sensitive. For more information about creating server data sources, refer to the SequeLink Administrator's Guide.
6879
Cannot create a data source for an agent service.
 
Cause
Server data sources cannot be created for SequeLink Agent services.
 
Action
Make sure that you are trying to create a server data source for a SequeLink data access service.
6880
Only one <object> may exist.
 
Cause
Only one instance of the object may exist.
 
Action
Contact DataDirect Technologies technical support.
6881
Invalid <object>.
 
Cause
An invalid SequeLink service name or server data source name was specified.
 
Action
Specify a correct SequeLink service name or server data source name.
6882
No <object> exists.
 
Cause
No instance of the object exists.
 
Action
Contact DataDirect Technologies technical support.
6883
<object> already exists.
 
Cause
The SequeLink service name or the server data source name already exists.
 
Action
Contact DataDirect Technologies technical support.
6884
<object> still used by service <service name>.
 
Cause
The object is still used by the specified SequeLink service.
 
Action
Contact DataDirect Technologies technical support.
6885
Cannot delete required attribute <ID or name>.
 
Cause
The attribute cannot be deleted because it is required.
 
Action
Contact DataDirect Technologies technical support.
6886
Unable to determine event trace location for service <service name>.
 
Cause
An event trace file for the SequeLink service could not be located. Either SequeLink service information could not be retrieved or the ServiceEventTraceLocation service attribute could not be found in the service information.
 
Action
Make sure that the SequeLink service is active. If it is, check the ServiceEventTraceLocation service attribute to make sure that it is specified correctly. For more information about specifying SequeLink service attributes, refer to the SequeLink Administrator's Guide.
6887
Event trace not available for service <service name>. Check if the service is running and an event trace profile is created.
 
Cause
Event tracing was not enabled for the specified SequeLink service.
 
Action
Enable an event tracing profile for the SequeLink service, and make sure that the SequeLink service is running. For more information about enabling profiles for a SequeLink service, refer to the SequeLink Administrator's Guide.
6888
Failed to open event trace file <file name>.
 
Cause
The specified event trace file could not be opened.
 
Action
Make sure that you have sufficient privileges to open and read the file, and make sure that the file is not being used by another SequeLink service.
6890
Invalid array index <number> for attribute <ID or name>.
 
Cause
An invalid attribute array index was specified.
 
Action
Specify a valid array index.
6892
Invalid session ID <number>.
 
Cause
An invalid session ID was specified.
 
Action
Specify a correct session ID.
6893
No configuration opened.
 
Cause
A SequeLink Manager request was made that required a connection to a SequeLink Agent or a SequeLink configuration file.
 
Action
Connect to a SequeLink Agent or open a SequeLink configuration file before making SequeLink Manager requests.
6894
Invalid numeric value <value>.
 
Cause
A value was specified that could not be converted to a numeric value.
 
Action
Specify a valid numeric value.
6895
Failed to prompt for user ID and password.
 
Cause
The callback function to prompt for a user ID and password failed.
 
Action
Contact DataDirect Technologies technical support.
6896
Invalid attribute name <name>.
 
Cause
An invalid attribute name was specified.
 
Action
Specify a valid attribute. For more information about specifying SequeLink service attributes, refer to the SequeLink Administrator's Guide.
6897
No agent service found in <file name>.
 
Cause
A SequeLink Agent service was not defined in the specified SequeLink configuration file.
 
Action
Create a SequeLink Agent service. For information about creating SequeLink services, refer to the SequeLink Administrator's Guide.
6898
Unable to locate local SequeLink server configuration file.
 
Cause
A local SequeLink configuration file could not be located.
 
Action
Make sure that you have specified the local configuration file correctly.
6899
SequeLink Administration library has not been initialized.
 
Cause
A call to the SequeLink Manager library was made before calling SLMAM_Init.
 
Action
Contact DataDirect Technologies technical support.
6900
Service <service name> already exists.
 
Cause
A SequeLink service with the same service name already exists.
 
Action
Specify a unique service name for the SequeLink service.
6901
Invalid token in service name.
 
Cause
The specified service name contains a token that is not allowed.
 
Action
Choose another name for your SequeLink service.
6902
Service <service name> is already started.
 
Cause
An attempt was made to start a SequeLink service that was already started.
 
Action
None.
6903
Service <service name> is not active.
 
Cause
The specified SequeLink service is not active.
 
Action
None.
6904
No monitor profile available for service <service name>.
 
Cause
The specified SequeLink service does not have monitoring enabled.
 
Action
Enable a monitoring profile for the SequeLink service. For more information about enabling monitoring profiles, refer to the SequeLink Administrator's Guide.
6905
A monitor profile already exists for service <service name>.
 
Cause
The specified SequeLink service already has monitoring enabled.
 
Action
None.
6906
No event log profile available for service <service name>.
 
Cause
The specified SequeLink service does not have event tracing enabled.
 
Action
Enable an event tracing profile for the SequeLink service. For more information about enabling profiles for SequeLink services, refer to the SequeLink Administrator's Guide.
6911
The default data source for service <service name> may not be destroyed.
 
Cause
An attempt to delete the default server data source was detected. The default server data source for the specified SequeLink service cannot be deleted.
 
Action
None.
6912
Unable to find a default data source for service <service name>.
 
Cause
The default server data source for the specified SequeLink service could not be found.
 
Action
Contact DataDirect Technologies technical support.
6913
Session monitoring has not been enabled for service <service name>.
 
Cause
The monitoring profile enabled for the specified SequeLink service does not provide session or statement counters.
 
Action
Enable a monitoring profile for the SequeLink service that uses session or statement counters. For more information about enabling profiles for SequeLink services, refer to the SequeLink Administrator's Guide.
6914
Failed to start service <service name>.
 
Cause
The specified SequeLink service could not be started.
 
Action
Details about the failure are logged in the service debug log file, the event trace file, or the system logging facility. Examine these details to troubleshoot the problem.
7361
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
7362
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
7363
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
7364
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
7365
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
7366
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
7367
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
7368
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
7369
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
7370
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
7391
Driver cannot perform requested operation: {0}.
 
Cause
The method {0} is not supported by this version of the JDBC driver.
 
Action
Verify the method {0} in your JDBC application.
7392
Object is closed. The JDBC application used an illegal method on a closed object.
 
Cause
Object is closed. The JDBC application used an illegal method on a closed object.
 
Action
Correct your JDBC application.
7393
The value specified for parameter `{0}` is invalid.
 
Cause
The value specified for parameter `{0}` is invalid.
 
Action
Verify the value of the parameter '{0}' in your JDBC application.
7394
The method call `{0}' is not supported on a forward-only result set. The JDBC application used an illegal method on a forward-only result set.
 
Cause
The method `{0}' is not supported on a forward-only result set. The JDBC application used an illegal method on a forward-only result set.
 
Action
Correct your JDBC application.
7395
Timeout expired.
 
Cause
A timeout expired.
 
Action
Verify that the SequeLink Server is running and that you have specified the correct network address of the host. If your configuration is correct, increase the connection timeout value.
7396
The specified URL is not accepted: {0}.
 
Cause
The specified URL is not accepted: {0}.
 
Action
Verify the specified connection URL.
7397
Insufficient information to connect. Missing parameters are: {0}.
 
Cause
Insufficient information to connect was supplied. Missing parameters are: {0}.
 
Action
Make sure that you specify the connection URL completely. For information about the syntax of the connection URL, refer to the SequeLink Administrator's Guide.
7398
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
7399
Method {0} cannot be called when a result set is open. The JDBC application used an illegal method on a Statement, which has an open result set.
 
Cause
Method {0} cannot be called when a result set is open. The JDBC application used an illegal method on a Statement, which has an open result set.
 
Action
Correct your JDBC application.
7400
Error occurred while reading properties file.
 
Cause
An error occurred while reading the properties file.
 
Action
Contact DataDirect Technologies technical support.
7401
Insufficient information to log on to the database. Missing parameters are: {0}.
 
Cause
Insufficient information was provided to log on to the database. Missing parameters are indicated by {0}.
 
Action
Re-attempt the connection, making sure that you specify the connection URL completely.
7402
Unexpected error occurred during timed connection startup.
 
Cause
An unexpected error occurred during timed connection startup.
 
Action
Obtain the next exception for more information. If necessary, contact DataDirect Technologies technical support.
7403
Statement did not generate a row count. executeUpdate() cannot be used on a statement that returns a result set.
 
Cause
The statement did not generate a row count. executeUpdate() cannot be used on a statement that returns a result set.
 
Action
Correct your JDBC application.
7404
Statement did not generate a result set. executeQuery() cannot be used on a statement that does not return a result set.
 
Cause
The statement did not generate a result set. executeQuery() cannot be used on a statement that does not return a result set.
 
Action
Correct your JDBC application.
7405
Conversion not supported: {0}() for SQL data type {1}. The specified method is illegal for a column of the specified SQL data type.
 
Cause
The specified method is invalid for a column of the specified SQL data type.
 
Action
Correct your JDBC application.
7406
Conversion of value `{0}' at column `{1}' failed. The data type conversion for the specified column failed.
 
Cause
The data type conversion for the specified column failed.
 
Action
Correct your JDBC application.
7407
An unsupported SQL data type has been specified: {0}. The specified SQL data type is invalid.
 
Cause
The specified SQL data type is invalid.
 
Action
Correct your JDBC application.
7408
Invalid use of null string.
 
Cause
A null string is incorrectly used as a parameter or a method of DatabaseMetaData.
 
Action
Correct your JDBC application.
7409
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
7410
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
7411
An internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
7412
Use register OutParameter (int, int, int) for SQL data type {0}. The method registerOutParameter (int, int) is not supported for DECIMAL data.
 
Cause
The method registerOutParameter (int, int) is not supported for DECIMAL data.
 
Action
Correct your JDBC application.
7413
No output parameter is registered at parameter index {0}. registerOutParameter must be called prior to getXXX() on a CallableStatement.
 
Cause
registerOutParameter must be called prior to getXXX() on a CallableStatement.
 
Action
Correct your JDBC application.
7414
Conversion not supported: {0}() used for SQL data type {1} at parameter index {2}. The specified method is illegal for a column of the specified SQL data type.
 
Cause
The specified method is invalid for a column of the specified SQL data type.
 
Action
Correct your JDBC application.
7415
Illegal method call on a PreparedStatement. The methods on Statement that have a SQL statement as parameter, like execute(sql) and addBatch(sql), are not supported on PreparedStatements.
 
Cause
The methods on Statement that have a SQL statement as parameter, like execute(sql) and addBatch(sql), are not supported on PreparedStatements.
 
Action
Check your JDBC application.
7416
The number of input parameters is different from the previous parameter set.
 
Cause
The number of input parameters is different from the previous parameter set.
 
Action
Check your JDBC application.
7417
Output parameters with batch updates are not supported.
 
Cause
You cannot use output parameters with batch updates.
 
Action
Check your JDBC application.
7418
An object of the unsupported class {0} has been specified. The JDBC application specified an object of the unsupported class as parameter for PreparedStatement.setObject().
 
Cause
The JDBC application specified an object of the unsupported class as parameter for PreparedStatement.setObject().
 
Action
Check your JDBC application.
7419
The number of bytes in a unicode stream cannot be an odd value.
 
Cause
The number of bytes in a Unicode stream cannot be an odd value.
 
Action
Check your JDBC application.
7420
Some parameters are not defined. The application did not call a setXXX() method for each parameter in the SQL statement.
 
Cause
Some parameters are not defined. The application did not call a setXXX() method for each parameter in the SQL statement.
 
Action
Check your JDBC application for undefined parameters.
7421
Illegal method call. There is no current row. This method invocation is only valid when the result set has a current row.
 
Cause
This method invocation is only valid when the result set has a current row.
 
Action
Check your JDBC application.
7422
Positioned updates are not supported.
 
Cause
Positional updates are not supported by this version of the JDBC driver.
 
Action
Check your JDBC application.
7423
The column `{0}' is not found. An invalid column name has been specified.
 
Cause
The specified column was not found. An invalid column name was specified.
 
Action
Check your JDBC application.
7424
The method {0}() does not apply to columns of type {1}.
 
Cause
The specified method does not apply to this type of column.
 
Action
Check your JDBC application.
7425
A batch cannot contain SQL statements that return a result set.
 
Cause
A batch cannot contain SQL statements that return a result set.
 
Action
Check your JDBC application. Make sure that only row count generating statements are used in a batch.
7426
Driver does not support batches containing stream variables.
 
Cause
The JDBC driver does not support large objects in batches.
 
Action
Check your JDBC application.
7427
Handshake failure: You are trying to connect to a server that is not a SequeLink Server.
 
Cause
An attempt was made to connect to a server that is not a SequeLink Server.
 
Action
Make sure that the connection information configured at the SequeLink Client is specified correctly to connect to the SequeLink Server.
7428
Handshake failure: You are trying to connect to a server that is not a SequeLink Server.
 
Cause
The SequeLink Client is incompatible with the version of the SequeLink Server to which it tried to connect.
 
Action
Verify that the versions of your SequeLink Client and SequeLink Server are compatible. Contact DataDirect Technologies technical support, if necessary.
7429
Handshake failure: A protocol error occurred during the connection setup.
 
Cause
An attempt was detected to connect to a SequeLink Server running an incompatible version of SequeLink.
 
Action
Verify that the versions of your SequeLink Client and SequeLink Server are compatible. Contact DataDirect Technologies technical support, if necessary.
7430
Driver does not support: different parameter target types. The JDBC driver does not allow you to change the type of parameters, once they are registered.
 
Cause
The JDBC driver does not allow you to change the type of parameters once they are registered.
 
Action
Check your JDBC application. Possibly, add a call to clearParameters().
7431
Column index out of bounds. The column index your JDBC application specified is out of bounds.
 
Cause
Your JDBC application specified a column index that is out of bounds.
 
Action
Check your JDBC application.
7432
Internal error: Invalid state of statement context `{0}'.
 
Cause
The state of statement context `{0}' was invalid.
 
Action
Contact DataDirect Technologies technical support.
7433
Conversion not supported: setObject() with object type {0} used for SQL data type {1} at parameter index {2}.
 
Cause
This type of conversion not supported.
 
Action
Check your JDBC application.
7434
An authentication mechanism could not be successfully negotiated.
 
Cause
The SequeLink Server did not specify an authentication mechanism supported by the SequeLink Client.
 
Action
Make sure that the SequeLink Server specifies an authentication mechanism supported by the SequeLink Client. Refer to the SequeLink Administrator's Guide for information about setting authentication.
7435
Unable to resolve transliteration: {0}. The JDBC driver does not support the transliteration used by your server.
 
Cause
The JDBC driver does not support the transliteration used by your server.
 
Action
Contact DataDirect Technologies technical support.
7436
Error occurred while processing transliteration table: {0}.
 
Cause
An error occurred while processing a transliteration table.
 
Action
Contact DataDirect Technologies technical support.
7437
Transliteration table corrupt: {0}.
 
Cause
A transliteration table was corrupted.
 
Action
Contact DataDirect Technologies technical support.
7438
NumberFormatException during setObject() with object type {0} used for SQL data type {1} at parameter index {2}.
 
Cause
A NumberFormatException occurred during setObject() with object type {0} used for SQL data type {1} at parameter index {2}.
 
Action
The subsequent exception will give you more information. Check your JDBC application.
7439
XA-Open failed with return code {0}.
 
Cause
XA-Open failed with the specified return code.
 
Action
Refer to the X/Open XA Specification for more information about the return code.
7440
XA-Close failed with return code {0}.
 
Cause
XA-Close failed with the specified return code.
 
Action
Refer to the X/Open XA Specification for more information about the return code.
7441
An error occurred while processing the cache of the insensitive scrollable resultset.
 
Cause
An error occurred while processing the cache of the insensitive scrollable result set.
 
Action
Contact DataDirect Technologies technical support.
7442
FetchSize must be less than maxRowSize.
 
Cause
FetchSize must be less than maxRowSize.
 
Action
Check your JDBC application.
7443
Method {0} cannot be called when the statement is executed.
 
Cause
The JDBC driver cannot change the setmaxFieldSize when the statement is already executed.
 
Action
Check your JDBC application.
7444
Value of setMaxFieldSize exceeds maximum limit.
 
Cause
The value of setMaxFieldSize exceeded the maximum limit. To avoid excessive memory use, the JDBC driver limits the maximum value of setMaxFieldSize.
 
Action
If you require higher values, contact DataDirect Technologies technical support.
7445
Internal error occurred.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
7446
Error occurred while processing transliteration table: {0}.
 
Cause
An error occurred while processing a transliteration table.
 
Action
Contact DataDirect Technologies technical support.
7447
An unsupported transliteration type has been specified: {0}.
 
Cause
An unsupported transliteration type has been specified.
 
Action
Contact DataDirect Technologies technical support.
7448
You are attempting to use this DataDirect Technologies software from an application that is not licensed to use it.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
7449
Server asked for unknown encryption.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
7450
No initialization vector was sent when one was expected.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
7451
Initialization vector has wrong size ({0} bytes). Expected {1} bytes.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
7452
Error occurred during transliteration.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
7481
Result set type is changed from `{0}' to `{1}'. This is a SQL Warning.
 
Cause
The result set type is changed from `{0}' to `{1}'. This is a SQL Warning.
 
Action
Refer to the SequeLink Developer's Reference for information about restrictions on scrollable cursors.
7482
Result set concurrency is changed from `{0}' to `{1}'. This is a SQL Warning.
 
Cause
Result set concurrency is changed from `{0}' to `{1}'. This is a SQL Warning.
 
Action
Refer to the SequeLink Developer's Reference for information about restrictions on scrollable cursors.
7483
Finalization thread could not be started. This is a SQL Warning. The JDBC driver is unable to "finalize" Connection and Statement objects during garbage collection.
 
Cause
Finalization thread could not be started. The JDBC driver is unable to finalize Connection and Statement objects during garbage collection.
 
Action
Make sure that your application explicitly closes the Connection and Statement objects.
7491
Object is closed.
 
Cause
The object is closed.
 
Action
Check your JDBC application.
7492
Cannot set autocommit to `on' for global transaction.
 
Cause
You cannot set Autocommit to "on" for global transactions.
 
Action
Check your JDBC application.
7493
Cannot commit for global transaction.
 
Cause
Global transaction could not be committed.
 
Action
Check your JDBC application.
7494
Cannot rollback for global transaction.
 
Cause
Global transaction could not be rolled back.
 
Action
Check your JDBC application.
7495
Reclaim of open connection is not supported.
 
Cause
The JDBC driver does not support the reclaim of open connections.
 
Action
Check your JDBC application.
7720
[SSL]Illegal port number specified.
 
Cause
An invalid port number was specified for the Port parameter in the proxy server configuration file.
 
Action
Check the Port parameter in the proxy server configuration file.
7721
[SSL]Illegal value for maximum number of connections.
 
Cause
An invalid value for the MaxConnections parameter in the proxy server configuration file was specified.
 
Action
Check the MaxConnections parameter in the proxy server configuration file.
7722
[SSL]Illegal value for Packet size.
 
Cause
An invalid value for the InitialPacketSize parameter in the proxy server configuration file was specified.
 
Action
Check the InitialPacketSize parameter in the proxy server configuration file.
7723
[SSL]Illegal transfer mode specified.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
7724
[SSL]Illegal log level specified.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
7725
[SSL]Illegal "sta16timeout" value specified.
 
Cause
An illegal value for the CloseWaitTime parameter in the proxy server configuration file was specified
 
Action
Check the CloseWaitTime parameter in the proxy server configuration file.
7726
[SSL]Internal error: proxy server state error.
 
Cause
An unexpected error occurred.
 
Action
Contact DataDirect Technologies technical support.
7727
[SSL]Cannot create server listener on given port.
 
Cause
The proxy server was unable to create a TCP/IP socket to listen for incoming connections. The proxy server may already be running or an incorrect port number was specified.
 
Action
  • Check the detailed exceptions.
  • Check the Port parameter in the proxy server configuration file.
  • Check the AdminPort parameter in the proxy server configuration file.
  • Make sure that the proxy server is not already running at the host.
7728
[SSL]Illegal server port number specified.
 
Cause
An invalid port number was specified for the ServerPort parameter in the proxy server configuration file.
 
Action
Check the ServerPort parameter in the proxy server configuration file.
7729
[SSL]Configuration file not found.
 
Cause
The specified proxy server configuration file was not found in the current directory. The proxy server configuration file is formed by adding the extensions .cfg to the proxy server name. The name of the proxy server can be specified using the last command-line parameter of the SequeLink Manager command used to start the proxy server.
 
Action
Verify that the proxy server configuration file has the extension .cfg in its name and exists in the current directory.
7730
[SSL]Cannot read configuration file.
 
Cause
The specified configuration file is not readable.
 
Action
Check the privileges of the specified configuration file.
7731
[SSL]Cannot create file inputstream.
 
Cause
Internal error. An IOException occurred while trying to read from the proxy server configuration file.
 
Action
Check the console of the proxy server machine for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7732
[SSL]Cannot read key/value pairs from stream into properties object.
 
Cause
Internal error. An IOException occurred when trying to interpret the proxy server configuration file as a properties object.
 
Action
Check the console of the proxy server machine for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7733
[SSL]Non-numerical value for port specified.
 
Cause
A non-numeric value is specified for the Port parameter in the proxy server configuration file.
 
Action
Check the Port parameter in the proxy server configuration file.
7734
[SSL]Non-numerical value for server port specified.
 
Cause
The proxy server configuration file specified an invalid value for the ServerPort parameter.
 
Action
Check the ServerPort parameter in the proxy server configuration file.
7735
[SSL]Non-numerical value for maximum number of connections specified.
 
Cause
The proxy server configuration file specified an invalid value for the MaxConnections parameter.
 
Action
Check the MaxConnections parameter in the proxy server configuration file.
7736
[SSL]Non-numerical value for maximum packet size specified.
 
Cause
The proxy server configuration file specified an invalid value for the InitialPacketSize parameter.
 
Action
Check the InitialPacketSize parameter in the proxy server configuration file.
7737
[SSL]Illegal value for LogLevel specified.
 
Cause
The proxy server configuration file specified an invalid value for the LogLevel parameter.
 
Action
Check the LogLevel parameter in the proxy server configuration file.
7738
[SSL]Illegal value for TransferMode specified.
 
Cause
The proxy server configuration file specified an invalid value for the TransferMode parameter.
 
Action
Check the TransferMode parameter in the proxy server configuration file.
7739
[SSL]Illegal administration port number specified.
 
Cause
The proxy server configuration file specified an illegal port number for the AdminPort parameter.
 
Action
Check the AdminPort parameter in the proxy server configuration file.
7740
[SSL]Non-numerical value for administration port specified.
 
Cause
The proxy server configuration file specified a non-numeric value for the AdminPort parameter.
 
Action
Check the AdminPort parameter in the proxy server configuration file.
7741
[SSL]Non-numerical value for backlog specified.
 
Cause
The proxy server configuration file specified a non-numeric value for the BackLog parameter.
 
Action
Check the BackLog parameter in the proxy server configuration file.
7742
[SSL]Illegal backlog value specified.
 
Cause
An illegal value for the BackLog parameter is specified in the proxy server configuration file.
 
Action
Check the BackLog parameter in the proxy server configuration file.
7743
[SSL]Use different port number for administration port.
 
Cause
An attempt was made to use the same port number for the proxy server port (Port parameter) used for listening to incoming requests and the proxy server administration port (AdminPort parameter).
 
Action
  • Check the Port parameter in the proxy server configuration file.
  • Check the AdminPort parameter in the proxy server configuration file.
7744
[SSL]Fatal error occurred while receiving accept.
 
Cause
Internal error. An error occurred when accepting an incoming connection request.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7745
[SSL]Host name not found or empty in configuration file.
 
Cause
A server that is not a SequeLink Server has been specified using the proxy server Host parameter.
 
Action
Check the Host parameter in the proxy server configuration file. Make sure that it specifies a SequeLink Server.
7746
[SSL]Non-numerical value for close wait time specified.
 
Cause
The proxy server configuration file specified a non-numeric value for the CloseWaitTime parameter.
 
Action
Check the CloseWaitTime parameter in the proxy server configuration file.
7747
[SSL]Network read error in client read message length operation.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file name for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7748
[SSL]Network read error in client read message operation.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7749
[SSL]End of input in client read message length operation.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7750
[SSL]End of input in client read message operation.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7751
[SSL]Network write error in client write operation.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7752
[SSL]Client message decoding failed.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7753
[SSL]Invalid client connection.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7754
[SSL]Closing client connection failed.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7755
[SSL]Internal error in client read message operation.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7756
[SSL]Network write error in client write SSL/TLS Alert message.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7757
[SSL]Network read error in server read message length operation.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7758
[SSL]Network read error in server read message operation.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7759
[SSL]Network read error in server read message length operation.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7760
[SSL]End of input in server read message operation.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7761
[SSL]Network write error in server write operation.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7762
[SSL]Server message decoding failed.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7763
[SSL]Invalid server connection.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7764
[SSL]Connection to server failed.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7765
[SSL]Closing server connection failed.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7766
[SSL]Internal error in server read message operation.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7767
[SSL]Network write error in server write SSL/TLS Alert message.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7768
[SSL]Cannot add connection object to connection list.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7769
[SSL]Graceful disconnection failed.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7770
[SSL]Data transfer between client and server already active.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7771
[SSL]State error.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7772
[SSL]Internal error: no data to process.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7773
[SSL]Could not allocate memory for send/receive buffer.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7774
[SSL]Could not start new thread.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7775
[SSL]Maximum number of simultaneous connections reached. Cannot add connection to connection list.
 
Cause
The maximum number of connections specified by the MaxConnections parameter in the proxy server configuration file has been reached.
 
Action
Check the MaxConnections parameter in the proxy server configuration file. Increase the value of this parameter, if necessary.
7776
[SSL]Cannot create a connection list with a negative or zero number of maximum connections.
 
Cause
An illegal value is specified for the MaxConnections parameter in the proxy server configuration file.
 
Action
Check the MaxConnections parameter in the proxy server configuration file.
7777
[SSL]Internal error: connection list state error.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7778
[SSL]Could not start new thread.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7779
[SSL]Cannot create a dictionary for log file.
 
Cause
The directory specified by the LogDir parameter in the proxy server configuration file does not exist. An error occurred in an attempt to create the missing directory.
 
Action
  • Check the LogDir parameter in the proxy server configuration file.
  • Verify that the required file privileges are set.
  • If the previous actions do not resolve the problem, try to create the logging directory explicitly.
7780
[SSL]Cannot access log file.
 
Cause
The proxy server log file already exists and an error occurred when trying to read from or write to this file.
 
Action
  • Check the console of the proxy server machine for more detailed error messages.
  • Verify that the required file privileges are set.
  • Make sure that no other process is using the log file.
7781
[SSL]Seek in log file failed.
 
Cause
An internal error occurred when processing an existing log file.
 
Action
  • Verify that the required file privileges are set.
  • Make sure that no other process is using the log file.
  • If the previous actions do not resolve the problem, contact DataDirect Technologies technical support.
7782
[SSL]Get file descriptor failed.
 
Cause
An internal error occurred when processing an existing log file.
 
Action
  • Verify that the required file permission are set.
  • Make sure that no other process is using the file.
  • If the previous actions do not resolve the problem, contact DataDirect Technologies technical support.
7783
[SSL]Cannot create file outputstream.
 
Cause
An error occurred when trying to write to the proxy server log file.
 
Action
  • Check the proxy server console for more detailed error messages.
  • Verify that the required file permissions are set.
7784
[SSL]Cannot create endpoint for proxy server administration.
 
Cause
The Proxy server was unable to create the TCP/IP socket to listen for incoming administration requests. The proxy server may already be running or an invalid TCP/IP port may have been specified.
 
Action
  • Check the detailed exceptions.
  • Check the AdminPort parameter in the proxy server configuration file.
  • Make sure that a proxy server is not already running at the host.
7785
[SSL]Unknown operation requested by system administrator.
 
Cause
A non-fatal internal error occurred.
 
Action
Check the proxy server log file for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7786
[SSL]Could not connect to proxy server: check if the proxy server was started.
 
Cause
An attempt was made to stop a proxy server, but a proxy server was not found. The proxy server may already be stopped.
 
Action
Make sure the proxy server is started before stopping it.
7787
[SSL]Cannot create data output stream over socket.
 
Cause
An internal error occurred when trying to stop a running proxy server.
 
Action
Check the console of the proxy server machine for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7788
[SSL]Write to data output stream failed.
 
Cause
An internal error occurred when trying to stop a running proxy server.
 
Action
Check the console of the proxy server machine for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7789
[SSL]Write to data output stream failed.
 
Cause
An internal error occurred when trying to stop a running proxy server.
 
Action
Check the console of the proxy server machine for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7790
[SSL]Write to data output stream failed.
 
Cause
An internal error occurred when trying to stop a running proxy server.
 
Action
Check the console of the proxy server machine for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7791
[SSL]Unable to close end point.
 
Cause
An internal error occurred when trying to stop a running proxy server.
 
Action
Check the console of the proxy server machine for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7792
[SSL]Non-numerical value for port specified.
 
Cause
A non-numeric value was specified for the AdminPort parameter in the proxy server configuration file. The AdminPort parameter must have a numeric value.
 
Action
Check the AdminPort parameter in the proxy server configuration file.
7793
[SSL]Unknown local host.
 
Cause
An internal error occurred when trying to stop a running proxy server.
 
Action
Contact DataDirect Technologies technical support.
7794
[SSL]Supply name of proxyserver.
 
Cause
Internal error. No name is specified when starting a proxy server.
 
Action
Contact DataDirect Technologies technical support.
7795
[SSL]Cannot create data input stream over socket.
 
Cause
An internal error occurred when trying to stop a running proxy server.
 
Action
Check the console of the proxy server machine for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7796
[SSL]Network read error in read message length.
 
Cause
An internal error occurred when trying to stop a running proxy server.
 
Action
Check the console of the proxy server machine for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7797
[SSL]Network read error in read message length.
 
Cause
An internal error occurred when trying to stop a running proxy server.
 
Action
Check the console of the proxy server machine for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7798
[SSL]Internal error: IOException in read token operation.
 
Cause
An internal error occurred when trying to stop a running proxy server.
 
Action
Check the console of the proxy server machine for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7799
[SSL]Not an administration message.
 
Cause
The running proxy server received an administration request, but the message was not recognized. You may be trying to connect to the administration port.
 
Action
  • Check the connection information configured at the SequeLink Client.
  • Check the AdminPort parameter in the proxy server configuration file.
7800
[SSL]Administration request only allowed from localhost.
 
Cause
An attempt was made to stop a proxy server running on another host.
 
Action
You cannot stop a proxy server running on another host. Stop the proxy server from the host on which it is running.
7801
[SSL]Error while accepting incoming connection on administration port.
 
Cause
An internal error occurred when trying to stop a running proxy server.
 
Action
Check the console of the proxy server machine for more detailed error messages. If necessary, contact DataDirect Technologies technical support.
7802
[SSL]No administration listener started: could not stop proxy server.
 
Cause
An attempt was made to stop a proxy server that has no administration listener started.
 
Action
Check the AdminPort parameter in the proxy server configuration file.
7803
[SSL]Proxy server with the name "<proxy server name>" already running.
 
Cause
A remote administration internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
7804
[SSL]Proxy server with name "<proxy server name>" is not running.
 
Cause
A remote administration internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
7805
[SSL]Error while starting proxy server: <proxy server name>.
 
Cause
A remote administration internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
7806
[SSL]Error while stopping proxy server: <proxy server name>.
 
Cause
A remote administration internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
7830
[SSL]Failed to load authentication provider class.
 
Cause
Internal error. A fatal error occurred when loading a specified provider class. Providers must be specified in the com.ddtek.sequelink.slje.properties properties file. At startup, all authentication providers are loaded in the order they are specified. If the provider class is not found, this provider is not installed. When a provider class is found, but an error occurred when loading it, this error message is returned.
 
Action
Check the detailed error message. If necessary, contact DataDirect Technologies technical support.
7831
[SSL]Authentication provider "<provider class name>" has wrong type.
 
Cause
Internal error. A provider specified in the com.ddtek.sequelink.slje.properties properties file is not a sub-class of com.ddtek.sequelink.auth.MGSSProvider.
 
Action
Check the com.ddtek.sequelink.slje.properties properties file. If necessary, contact DataDirect Technologies technical support.
7832
[SSL]No authentication provider specified or found.
 
Cause
No provider specified in the com.ddtek.sequelink.slje.properties properties file can be found.
 
Action
Check the com.ddtek.sequelink.slje.properties properties file. Make sure that the provider classes specified in this properties file are defined in the classpath. If necessary, contact DataDirect Technologies technical support.
7833
[SSL]An unsupported mechanism was requested.
 
Cause
Internal error (standard MDSS error). No installed provider could support the requested authentication mechanism.
 
Action
Check the com.ddtek.sequelink.slje.properties properties file. Make sure that the provider classes specified in this properties file are defined in the classpath. If necessary, contact DataDirect Technologies technical support.
7834
[SSL]An invalid name was supplied.
 
Cause
An internal error (standard MGSS error) occurred. Not used by the standard SequeLink authentication modules.
 
Action
Contact DataDirect Technologies technical support.
7835
[SSL]A supplied name was of an unsupported type.
 
Cause
Internal error (standard MGSS error) occurred. Not used by the standard SequeLink authentication modules.
 
Action
Contact DataDirect Technologies technical support.
7836
[SSL]Incorrect channel bindings were supplied.
 
Cause
An internal error (standard MGSS error) occurred. Not used by the standard SequeLink authentication modules.
 
Action
Contact DataDirect Technologies technical support.
7837
[SSL]An invalid status code was supplied.
 
Cause
An internal error (standard MGSS error) occurred. Not used by the standard SequeLink authentication modules.
 
Action
Contact DataDirect Technologies technical support.
7838
[SSL]A token had an invalid MIC.
 
Cause
An internal error (standard MGSS error) occurred. Not used by the standard SequeLink authentication modules.
 
Action
Contact DataDirect Technologies technical support.
7839
[SSL]No credentials were supplied, or the credentials were unavailable or inaccessible.
 
Cause
Authentication failed because the supplied credentials (for example, user name or password) were incorrect or missing. The required credentials depend on the selected authentication mechanism.
 
Action
  • Check the supplied authentication information (for example, user name or password).
  • Check which credentials the selected authentication mechanism expects.
7840
[SSL]Invalid context has been supplied.
 
Cause
Internal error (standard MGSS error). This is an internal error or an authentication state error.
 
Action
Contact DataDirect Technologies technical support.
7841
[SSL]A supplied token was invalid.
 
Cause
An internal error (standard MGSS error) occurred. A token used during authentication between client and server was invalid. This is an internal error in the selected authentication mechanism or a mismatch between client and server authentication providers.
 
Action
Check the com.ddtek.sequelink.slje.properties properties file. If necessary, contact DataDirect Technologies technical support.
7842
[SSL]A supplied credential was invalid.
 
Cause
An internal error (standard MGSS error) occurred. Not used by the standard SequeLink authentication modules.
 
Action
Contact DataDirect Technologies technical support.
7843
[SSL]The referenced credentials have expired.
 
Cause
An internal error (standard MGSS error) occurred. Not used by the standard SequeLink authentication modules.
 
Action
Contact DataDirect Technologies technical support.
7844
[SSL]The context has expired.
 
Cause
An internal error (standard MGSS error) occurred. Not used by the standard SequeLink authentication modules.
 
Action
Contact DataDirect Technologies technical support.
7845
[SSL]Miscellaneous failure, unspecified at the MGSS level.
 
Cause
An internal error (standard MGSS error) occurred. Not used by the standard SequeLink authentication modules.
 
Action
Contact DataDirect Technologies technical support.
7846
[SSL]The quality-of-protection requested could not be provided.
 
Cause
An internal error (standard MGSS error) occurred. Not used by the standard SequeLink authentication modules.
 
Action
Contact DataDirect Technologies technical support.
7847
[SSL]The operation is forbidden by local security policy.
 
Cause
An internal error (standard MGSS error) occurred. Not used by the standard SequeLink authentication modules.
 
Action
Contact DataDirect Technologies technical support.
7848
[SSL]The operation or option is unavailable.
 
Cause
An internal error (standard MGSS error) occurred. Not used by the standard SequeLink authentication modules.
 
Action
Contact DataDirect Technologies technical support.
7849
[SSL]The requested credential element already exists.
 
Cause
An internal error (standard MGSS error) occurred. Not used by the standard SequeLink authentication modules.
 
Action
Contact DataDirect Technologies technical support.
7850
[SSL]The provided name was not a mechanism name.
 
Cause
An internal error (standard MGSS error) occurred. Not used by the standard SequeLink authentication modules.
 
Action
Contact DataDirect Technologies technical support.
7851
[SSl]Failed to create authentication provider instance.
 
Cause
A fatal error occurred when loading a specified provider class. Providers must be specified in the com.ddtek.sequelink.slje.properties properties file. At startup, all authentication providers are loaded in the order they are specified. If the provider class is not found, this provider is not installed. When a provider class is found, but an error occurred when instantiating this provider class, this message is returned.
 
Action
Check the detailed error messages and the com.ddtek.sequelink.slje.properties properties file. If necessary, contact DataDirect Technologies technical support.
7852
[SSL]Server-side authentication is not supported by the authentication library.
 
Cause
Internal error. An attempt was made to use the Java authentication library in server mode.
 
Action
Contact DataDirect Technologies technical support.
7853
[SSL]Authentication failed: <reason>.
 
Cause
An attempt to authenticate the client to a server has failed.
 
Action
Check the detailed exceptions.
7921
[SSL]Internal error.
 
Cause
Internal error in the SSL modules.
 
Action
Contact DataDirect Technologies technical support.
7922
[SSL]The symbolic host name could not be resolved to an IP address.
 
Cause
The supplied server host name is unknown.
 
Action
  • Check the server name.
  • Check the detailed error message.
7925
[SSL]Error creating SSL socket.
 
Cause
Internal error while setting up an SSL/TLS socket at the client (or proxy) server.
 
Action
Check the detailed error messages. If necessary, contact DataDirect Technologies technical support.
7926
[SSL]Error closing SSL socket.
 
Cause
Internal error while closing up an SSL/TLS socket at the client (or proxy) server.
 
Action
Check the detailed error messages. If necessary, contact DataDirect Technologies technical support.
7927
[SSL]Error receiving accept.
 
Cause
An internal error occurred while closing an SSL/TLS socket at the SequeLink Client (or proxy) server.
 
Action
Check the detailed error messages to troubleshoot the problem. If the error still occurs, contact DataDirect Technologies technical support.
7929
[SSL]The cipher suite "<cipher suite>" is not supported.
 
Cause
The client or the proxy server specified an unsupported cipher suite.
NOTE: "exportable" cipher suites are not supported by this release of SequeLink. Use the corresponding cryptographic strong cipher suite.
 
Action
  • Check the CipherSuites connection parameter at the client.
  • Check the CipherSuites parameter in the proxy server configuration file.
7930
[SSL]The cipher suite "<cipher suite>" is unknown.
 
Cause
The client or the proxy server specified an unknown cipher suite.
 
Action
  • Check the CipherSuites connection parameter at the client.
  • Check the CipherSuites parameter in the proxy server configuration file.
7931
[SSL]No cipher suite has been specified.
 
Cause
No cipher suite has been specified by the client or the proxy server.
 
Action
  • Check the CipherSuites connection parameter.
  • Check the CipherSuites parameter in the proxy server configuration file.
7932
[SSL]Problem reading files required for certificates.
 
Cause
An error occurred while reading the specified certificate by the proxy server.
 
Action
  • Check the detailed error messages.
  • Check the RSACertificate parameter in the proxy server configuration file.
  • Check the DSSCertificate parameter in the proxy server configuration file.
7934
[SSL]Certificate Checker class not found.
 
Cause
The user supplied class implementing the Certificate Checker interface was not found in the classpath by the SequeLink Client.
 
Action
  • Check the CertificateChecker connection parameter.
  • Check if the specified certificate checker is in the client's classpath.
7937
[SSL]Unexpected IOException occurred while reading the pass phrase.
 
Cause
An internal error occurred while reading the pass phrase from the console when starting the proxy server.
 
Action
  • Supply the pass phrase using the pass phrase dialog.
  • Contact DataDirect Technologies technical support.
7938
[SSL]Unexpected Exception occurred while decrypting the private key, probable cause: invalid pass phrase.
 
Cause
An error occurred while reading an unencrypted pass phrase. When the pass phrase parameter in the proxy server configuration file is empty, the private key is interpreted as unencrypted.
 
Action
  • Check the RSAPrivateKey parameter in the proxy server configuration file.
  • Check the DSSPrivateKey parameter in the proxy server configuration file.
  • Check the PassPhrase parameter in the proxy server configuration file.
7939
[SSL]Unexpected IOException occurred while reading the private key, probable cause: invalid pass phrase.
 
Cause
An error occurred when reading and decrypting the encrypted private key. A possible reason is that the supplied pass phrase with the proxy server startup is different from the pass phrase used to encrypt the private key.
 
Action
  • Check the RASPrivateKey parameter in the proxy server configuration file.
  • Check the DSSPrivateKey parameter in the proxy server configuration file.
  • Check the PassPhrase parameter in the proxy server configuration file.
7940
[SSL]A ciphersuite that requires an RSA certificate and a ciphersuite that requires a DSS certificate cannot be supplied at the same time.
 
Cause
An attempt was made to start the proxy server with a cipher suite list that contains both cipher suites which require an RSA certificate and cipher suites which require a DSS certificate. It is not possible to mix both families of cipher suites.
 
Action
Check the CipherSuites parameter in the proxy server configuration file.
7942
[SSL]A ciphersuite requires a DSS certificate that was not supplied.
 
Cause
An attempt was made to start the proxy server with a cipher suite list that contains a cipher suite which requires a DSS certificate, but no such certificate file has been specified.
 
Action
  • Check the CipherSuites parameter in the proxy server configuration file.
  • Check the DSSCertificate parameter in the proxy server configuration file.
7943
[SSL]A ciphersuite requires a DSS privatekey that was not supplied.
 
Cause
An attempt was made to start the proxy server with a cipher suite list that contains a cipher suite which requires a DSS private key, but no such private key file has been specified.
 
Action
  • Check the CipherSuites parameter in the proxy server configuration file.
  • Check the DSSPrivateKey parameter in the proxy server configuration file.
7944
[SSL]A ciphersuite requires an RSAA certificate that was not supplied.
 
Cause
An attempt was made to start the proxy server with a cipher suite list that contains a cipher suite which requires an RSA certificate, but no such certificate file has been specified.
 
Action
  • Check the CipherSuites parameter in the proxy server configuration file.
  • Check the RSACertificate parameter in the proxy server configuration file.
7945
[SSL]A ciphersuite requires an RSA privatekey that was not supplied.
 
Cause
An attempt was made to start the proxy server with a cipher suite list that contains a cipher suite which requires an RSA private key, but no such private key file has been specified.
 
Action
  • Check the CipherSuites parameter in the proxy server configuration file.
  • Check the RSAPrivateKey parameter in the proxy server configuration file.
7946
[SSL]An unnecessary RSA certificate was supplied.
 
Cause
An attempt was made to start the proxy server with an RSA certificate, but SSL is not enabled or no cipher suite from the specified cipher suite list requires an RSA certificate.
 
Action
  • Check the Network parameter in the proxy server configuration file.
  • Check the CipherSuites parameter in the proxy server configuration file.
  • Check the RSACertificate parameter in the proxy server configuration file.
7947
[SSL]An unnecessary RSA privatekey was supplied.
 
Cause
An attempt was made to start the proxy server with an RSA private key, but SSL is not enabled or no cipher suite from the specified cipher suite list requires an RSA private key.
 
Action
  • Check the Network parameter in the proxy server configuration file.
  • Check the CipherSuites parameter in the proxy server configuration file.
  • Check the RSAPrivateKey parameter in the proxy server configuration file.
7948
[SSL]An unnecessary DSS certificate was supplied.
 
Cause
An attempt was made to start the proxy server with a DSS certificate, but SSL is not enabled or no cipher suite from the specified cipher suite list requires a DSS certificate.
 
Action
  • Check the Network parameter in the proxy server configuration file.
  • Check the CipherSuites parameter in the proxy server configuration file.
  • Check the DSSCertificate parameter in the proxy server configuration file.
7949
[SSL]An unnecessary DSS privatekey was supplied.
 
Cause
An attempt was made to start the proxy server with a DSS private key, but SSL is not enabled or no cipher suite from the specified cipher suite list requires a DSS private key.
 
Action
  • Check the Network parameter in the proxy server configuration file.
  • Check the CipherSuites parameter in the proxy server configuration file.
  • Check the DSSPrivateKey parameter in the proxy server configuration file.
7950
[SSL]An unnecessary value for the UsePassPhraseDialog was supplied.
 
Cause
The proxy server is started without SSL enabled or only anonymous cipher suites; therefore, a pass phrase does not need to be supplied.
 
Action
  • Check the UsePassPhraseDialog parameter in the proxy server configuration file.
  • Check the Network parameter in the proxy server configuration file.
  • Check the CipherSuites parameter in the proxy server configuration file.
7951
[SSL]An unnecessary pass phrase was supplied.
 
Cause
The proxy server is started without SSL enabled or only anonymous cipher suites; therefore, a pass phrase does not need to be supplied.
 
Action
  • Check the PassPhrase parameter in the proxy server configuration file.
  • Check the Network parameter in the proxy server configuration file.
  • Check the CipherSuites parameter in the proxy server configuration file.
7952
[SSL]You cannot use PassPhrase and UsePassPhraseDialog together.
 
Cause
The pass phrase required to decrypt the private key from the proxy server is specified in the proxy server configuration. It is unnecessary to prompt the user (using a dialog box or the console) for the pass phrase.
 
Action
  • Check the UsePassPhraseDialog parameter in the proxy server configuration file.
  • Check the PassPhrase parameter in the proxy server configuration file.
7954
[SSL]Unexpected InterruptedException occurred while reading the pass phrase.
 
Cause
An internal error occurred when requesting the user for the proxy server pass phrase using a dialog box.
 
Action
Contact DataDirect Technologies technical support.
7955
[SSL]SSL/TLS handshake failure.
 
Cause
The client attempted to make an SSL connection to the proxy server, but an error occurred during the initial SSL connection setup.
 
Action
  • Check the CipherSuites client connection attribute and the corresponding parameter in the proxy server configuration file.
  • Check the CertificateChecker client connection attribute.
  • Check the proxy server log file for more detailed error information.
7956
[SSL]Input of pass phrase interrupted by user.
 
Cause
Because the proxy server is configured to use SSL with cipher suites that require access to the private key, the proxy server prompts at startup for the pass phrase to use to decrypt the private key. This operation has been cancelled from the dialog by the user.
 
Action
  • Check the Network parameter in the Proxy Server configuration file.
  • Check the CipherSuites parameter in the Proxy Server configuration file.
9501
Handshake failure: You are trying to connect to a server that is not a SequeLink Server.
 
Cause
An attempt was made to connect to a server that is not a SequeLink Server.
 
Action
Make sure that the connection information configured at the SequeLink Client is specified correctly to connect to the SequeLink Server.
9502
Handshake failure: A protocol error occurred during the connection setup.
 
Cause
An attempt was detected to connect to a SequeLink Server running an incompatible version of SequeLink.
 
Action
Verify that the versions of your SequeLink Client and SequeLink Server are compatible. Contact DataDirect Technologies technical support, if necessary.
9503
Handshake failure: You are trying to connect to a server running an incompatible version of SequeLink Server.
 
Cause
The SequeLink Client is incompatible with the version of the SequeLink Server to which it tried to connect.
 
Action
Verify that the versions of your SequeLink Client and SequeLink Server are compatible. Contact DataDirect Technologies technical support, if necessary.
9509
Server asked for unknown encryption.
 
Cause
An internal error occurred.
 
Action
Contact DataDirect Technologies technical support.
9521
Unsupported authentication mechanism.
 
Cause
The authentication mechanism specified in the server configuration is not supported by this version of the .NET data provider or no authentication mechanism is specified.
 
Action
Check the ServiceAuthMethods attribute in your SequeLink Server configuration.
9522
Invalid OEM id.
 
Cause
The OEM id specified was not valid.
 
Action
Contact DataDirect Technologies technical support.
9523
Graphic data is not supported by this version of the SequeLink for .NET provider.
 
Cause
This version of the .NET data provider does not support graphic data.
 
Action
Check your .NET application.
9532
Encryption algorithm not supported in this version.
 
Cause
The encryption algorithm specified in the server configuration is not supported by this version of the .NET data provider.
 
Action
Check the ServiceEncryptionAlgorithm attribute in your SequeLink server configuration.
9535
Connection timed out.
 
Cause
Establishing a connection to SequeLink server timed out.
 
Action
Specify a larger value for the Connection Timeout attribute in your connection string.
9536
Command canceled.
 
Cause
The command was successfully canceled by the user.
 
Action
None.


PREVNEXT